Xoutpost.com

Xoutpost.com (https://xoutpost.com/forums.php)
-   Other BMWs (https://xoutpost.com/bmw-sav-forums/other-bmws/)
-   -   2008 6 Series - N62 (https://xoutpost.com/bmw-sav-forums/other-bmws/104238-2008-6-series-n62.html)

rhozen 07-17-2016 11:44 PM

2008 6 Series - N62
 
I have a 2008 6 Series with 95k miles and my car runs flawlessly. Recently I got a low pressure warning and had the vacuum pump replaced. My oil sensor stopped working so I had it replaced too. Since then, I have been consuming a quart of oil every 500-600 miles which is much more then it ever did before. There is no blue smoke coming from the tailpipe nor is there an oily smell. I removed the plastic shield, and there is no oil leaking underneath. It was recommended that I replace PCV which I did. I started using 10w40 weight oil which didn't help.

I realize it could be valve seals etc., but it happened all of a sudden and after I had the vacuum pump replaced.

Also, my car has a dipstick and the computer sensor which don't seem to agree. I assume my dipstick is to be trusted. The add oil light comes on when the sensor shows only 2 bars down.

Any comments or ideas would be appreciated.

Thank you!

Quicksilver 07-18-2016 09:28 AM

You might try here. 6Post.com | BMW 6-Series Forum - Powered by vBulletin


All times are GMT -4. The time now is 11:34 AM.

vBulletin, Copyright 2026, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved.