[Wheel Width question]
 

I'm looking @ a set of wheels- I can get any off set and virtually any size. My question is- is it possible to run a 22x10 on all four corners with the proper offsets, and if so what are the ETs? Thanks in advance!


Post any pics of 22" on E53s.

Anyone, please?

yes. it is possible to run 22x10 all around on an X5. imola4.8isWA has 22x10 DPE Wheels on his X5. Here is a pic of his car.

http://i56.photobucket.com/albums/g1...Picture015.jpg

I've got 22x9.5 JAZ Triumphs on my X5

http://a843.ac-images.myspacecdn.com...d302c082da.jpg

Yeah I love Imolas car. He's the one that got me on this site. I appreciate the answer, and nice 3.0.


Any suggested offsets for running 22x10s all around?

My wheels have an offset of +15ET all around. For a 10in wide wheel, I'd suggest going with anything from +35ET down to +25ET and it will look good. That's just my suggestion though.

Appreciate it! You have good taste so I'll take your word for it.

I just put a pair of Nad4 22's on my X. I will post a pic asap. I am pretty sure they are 22x9.5 all around.

x5 newbi here. would these guys fit the e53 nicely?!
http://cgi.ebay.com/ebaymotors/BMW-2...ayphotohosting

I have ACS Type II's - 22x10.5 all around.

The front wheels have a 5mm or 10mm spacer (can't remember), and the rear has a 30mm spacer, the wheels are totally flush with the body now.

Most of our 22x10's have an ET around 35 to 40 mm