| E38flagship |
01-28-2018 03:46 PM |
DIY no wiring rear fog
There is a diy on this subject but this is a twist with a lot less work. Obviously as we all know the round circle on the tail gate is the reverse fog. What I did was I coded using PA SOFT (rear side lights as fog lights) when you turn on your rear fog switch your “intensive braking lights” are now your reverse fog lights. The intensive brake light function still works but obviously if the rear fogs are on they do not. Basically all you have to do is install the correct switch including rear fog light code and your done :) no wires need to be run or bulb holders purchased! I very much wanted this feature as New England winters can be brutal and 90% of people on the road are obviously! I hope this helps someone after the same modification!
Off
http://i68.tinypic.com/xpuiw7.jpg |
