Confirm Torque Specs for Brake Job on 4.6is
 

Is this value universal for all e53? I have found the following values and want to confirm.

Front carrier bracket: 77lb-ft
Rear carrier bracket: 48 lb-ft
Guide Pins: 22lb-ft
Retaining screw: 12 lb-ft

From the Bentley Publishing X5 Service manual, 2007 Edition
Front carrier bracket: 81ft, 110 Nm
Rear carrier bracket: 48 lb-ft, 65 Nm
Guide Pins: 20lb-ft(+-1ft), 27Mn (+-2Nm)
Brake Rotor Retaining screw: 12 lb-ft

Thank you kind sir for the reply.

And by the way anyone that thinks you can reuse a bolt that has been torqued to yield and it doesnt change the properties is on borrowed time and hope your not sharing the road with me.

Jus sayin.

Torque Until Yield.

From a class test in Structure Engineering & Metallurgy
Q: What is the correct torque setting for a grade XX fastener with/o any known strength?
Correct answer: "Torque to failure, then back off 1/2 turn".....

Who says you don't learn anything in College that you can apply in the driveway or garage? :bustingup