self leveling bypass
 

My self leveling has stopped working. i jumped the wires to the pump, and it worked for a second, then nothing. ive check the fuses and changed the relay, and still nothing.
The car is sitting ok as it is, and plan to put springs in, but how can i bypass the warning on the dash? :dunno:

You can't You have to CLEAR THE CODES and it will come back to life................I went through this for 2 weeks with a bad mechanic here in NY..............
to bad your not here Pat has the software ..............fix mine in 20 minutes........

Would disconnecting the battery reset it?

no it didnt.
can i fit a resistor in somewhere? dont want to buy an expensive conversion module.

You need to get the EHC coded out of the vehicle order and you will need SSS to do so if I recall correctly, you can't just bypass the module with a resistor to defeat the warning.

this I am assuming is what you'd want to do after converting to springs.

I suppose I just wanted a quick fix. I saw the bypass with resister on a 5 series, and hoped I could do the same.