![]() |
Does anyone know where I can buy this part of the door carrier?
1 Attachment(s)
2005 X5 3.0i Sports
Does anyone know where I buy this cable part of the door carrier? I recently replaced the entire carrier for one door and am starting to see the other handles fail as well. After a careful observation, this cable part has been stretched out over the years and I'm confident that's all that's needed to be replaced. I don't want to buy the entire unit which isn't cheap especially if it's OEM. |
I don't think there is separate part# for that. It's included in door handle carrier.
If price matters, get Febi brand from rmeuropean.com. I've replaced both front carriers with Febi and it fit/works great. |
There osna tiny piece of metal that breaks on the carrier. It's not worth just trying to replace the cable. A Febi carrier is good enough.
|
That cable part is very simple to take out and replace. It takes less than 1 min. I would like to keep the original carrier and just replace this cable only if available.
|
Gotta buy the whole carrier brah, not sold separate
|
See if anyone here who replaced their door carrier will sell you the cable from their old carrier or just buy a used carrier on eBay.
|
Go ti bicycle shop and buy a short cable for cheap, then buy the crimp and crimp it yourself.
|
Quote:
|
Did you replace the cable? Mine is acting up again after replacing the lock/ actuator again(10 mos old) so I'm thinking something like the cable is stretched even though the door handle carrier is only a year old. Any body have the cable length measurement on a new one? I had the carrier out and saw no broken parts, that's why I replaced the lock/actuator again.
|
ecstuning.com has the carrier. I dont think you are going to find the cable itself tho...
|
Measure the exact size of the cable and buy some stainless of that size at Home Depot. About 37¢ per foot. The ends are about $1;50 for two (cable stops) crimping properly is the tricky part but for $20 Home Depot has a proper crimper also.
Sent from my awrPhone using Tapatalk |
The cable should be 6 5/8" long, center to center. Look for a wrinkle in the frame itself near the spring indicating that is bent. Look also at where the 7mm nut bolts the handle on, it could be spread apart.
|
| All times are GMT -4. The time now is 10:29 PM. |
vBulletin, Copyright 2026, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved.