Noise right rear
 

Yes. I have searched the web and this forum.. Hate to start That way but there is always someone that has to spank others when they ask a question. Have found some threads. But nothing definitive.

The issue, accelerate lightly and let off the gas and clunk.. Very repeatable... Standing behind the car when doing this at idle speed, going forward A foot at a time, it is very noticeable especially on passenger side. Putting my hand on the trailer hitch I can feel it when it happens ....

We had it on the lift today checked what we thought we should and all nut bolt were tight.

I suspect worn bushing, but could not I'd anything...

We even too out the spare tire and Jack, nothing found.

Ideas? Help?

Thanks

Rear sub frame bushings?

its the bushing that cause the squeak most likely cant remember the name

Thanks.

I'll try the bushings.

Any recommendations where to buy? Oem or equivilent is ok.. Ebay? Other?

Thx

Pup

I just had similar thunk I could not find. Front right brake caliper to strut nut was loose. Not a good thing. ��

If nothing has ever been done on the rear, get a rear suspension and subframe refresh kit. ECS and FCP Euro sell them. Find a good indy, or, if you're handy, have the proper bushing tools, some patience, time and like to curse, do it yourself :).

If you do it one bushing at a time (shop or yourself), you will pay more (time and money) than just doing all at once. If you rip and replace everything, you essentially swallow the pill and move on. But you will not be chasing bushing noises and having to do alignments every time either. Peace of mind is worth something :)

Unless it's a sway bar bushing. In that case, that's a pretty cheap/easy fix. The rest I would put in the bucket above.

Cheers.

could also be rear guibo. Id try and find EXACTLY where noise is coming from

Where can I rent the tool to do this job?

Should I go oem parts OEM or Meryle HD?

I used Meyle HD bushings for the subframe on mine. My buddy now has the tool for rent, I no longer own it as I traded him it for his 4.8iS exhaust. If you need it shoot me a pm

Ricky Bobby,

PM Sent