![]() |
Help Identifying Part
Good Afternoon Guys,
So I recently picked up an OEM Hitch for my E53 from a local BMW salvage yard. I got all the parts necessary to retrofit it to my E53 but I have two brackets and i'm not sure where they go. I've gone over several DIYs and haven't seen them mentioned anywhere. Tried looking for a part number on the part but there was none. Even tried Real OEM to see if I could find them on a diagram with no luck. Like I said, I'm fairly certain that i don't need them to retrofit the tow bar and he may have just given me some parts that I didn't need but I'm curious to know what they are. I attached several pictures of the bracket in question, if anyone can let me know what they go to I'd appreciate it. Thanks, Justin [url=https://flic.kr/p/vFnrvL]https://farm1.staticflickr.com/348/1...1a41090d_k.jpg [url=https://flic.kr/p/vFnsJh]https://farm4.staticflickr.com/3824/...b0e01d49_k.jpg [url=https://flic.kr/p/wkM6NE]https://farm1.staticflickr.com/260/1...391154e1_k.jpg |
There should be a pair of those. They reinforce one of the rear frame connections to tie the new hitch crossmember into the left and right frame rails. There is a long thread here with the original installation instructions as a PDF. They should be shown there.
|
|
Quote:
Yes I do have a pair of them. Now that makes more sense. Quote:
Thanks very much. I believe I looked at this PDF but did not see where they went. Appreciate you pointing it out on the diagram, I probably was not reading close enough and missed it. Glad I asked where they went. |
| All times are GMT -4. The time now is 11:56 AM. |
vBulletin, Copyright 2025, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved.