need help wires came off worn socket.
 

hello to all
while changing one my abs sensor the wires came out of the plug which is worn
and broke while pulling on it from age any way i bought 2 new ones from ecs tuning but know i need help to put the 2 wires back in the right place
1 wire is red 2nd wire is blue with red stripe see pics
thanks

Hope you're a gator at least!

I'll look up the wiring for you. Which wheel position?

Can you see little number 1 and 2 on the new housing if I tell you the matching colors?

If it is the front left sensor see this link:

http://www.xoutpost.com/923956-post4.html

Thanks I don't have the connector yet waiting for it to arrive sometime this week but you guys are saying there should be number 1 and 2 on the housing.???

Yep

thanks part be here tomorrow hope and pray it is label

ok got connectors today looking at pic from the bottom part hump facing up hole on the left is #2 hole on right is #1
hope this makes it more easier for future reference.so this thread could be close thanks for the replies.

For those of you following along. Wiring diagram ELE-203 in the Bentley manual. Front Left wheel speed sensor has two wires. Position 1 is RT (Red). Position 2 is BL/RT (Blue/Red stripe). Wire gauge is 0.5 mm2, or a hair smaller than 20 gauge.