![]() |
I hardly buy parts in the country, usually ship them, since I'm on a hurry to have it ready for the road trip I just went and grab it
Sent from my iPhone using Tapatalk |
Quote:
|
http://uploads.tapatalk-cdn.com/2016...9d48f98d12.jpg
Ok IS has been changed, make sure the new IS is aligned just as the old...( 10min job) Update: the symptoms still present. I haven't reset anything yet... Will report back Sent from my iPhone using Tapatalk |
Quick update.... The car won't start if I put in P.... Only if is in N.... What am I facing here?!?!?🤔🤔🤔
Sent from my iPhone using Tapatalk |
I think we need to clear up the "no power under the hood when it happens" first. but if it starts in neutral then sounds like neutral safety switch, maybe try to do a forum search, someone else just went through that. You need to do a little more diagnostics or it's going to cost you a fortune in parts!
|
I had to switch the IS anyway cuz of some electrical gremlins( lights would turn on after I turn them off and some other stuff, all that sorted)
Sent from my iPhone using Tapatalk |
When I put in P it doesn't light up, I was browsing thru the forum and I read " play with gear selector P and N and try it"... That's when I paid attention to P not lighting up
Sent from my iPhone using Tapatalk |
If you played with any of the cables to the trans or to the EGS module, look at the pins in the connectors. You might have damage a pin or broke a pin in one of the connectors.
|
Sorry if I mislead y'all, I only changed the IS, when I meant playing with P and N I only switched from P to N, so there's no change I damaged any pin in the connector....
Sent from my iPhone using Tapatalk |
Quote:
|
| All times are GMT -4. The time now is 10:38 AM. |
vBulletin, Copyright 2026, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved.