Xoutpost.com

Xoutpost.com (https://xoutpost.com/forums.php)
-   X5 (E53) Forum (https://xoutpost.com/bmw-sav-forums/x5-e53-forum/)
-   -   A/C Evaporator Repair (https://xoutpost.com/bmw-sav-forums/x5-e53-forum/104885-c-evaporator-repair.html)

X53Jay4.8is 10-15-2016 08:04 PM

A/C Evaporator Repair
 
So this past week I got into the Evaporator repair for my X5. It has a leak and now that the weather has gotten a little cooler now seemed to be the time. The pictures that I have attached below is just to give others an idea of how much has to be removed from the car to access the evaporator. Its a labor intensive job and the parts are not that costly. In any event i am changing the evaporator, expansion valve, seals, and resistor unit.

[IMG]http://i1189.photobucket.com/albums/...%20Repair1.jpg[/IMG]
[IMG]http://i1189.photobucket.com/albums/...%20Repair3.jpg[/IMG]
[IMG]http://i1189.photobucket.com/albums/...%20Repiar2.jpg[/IMG]

upallnight 10-15-2016 09:24 PM

Since you have everything apart I would also do the heater core. Don't want to tear everything apart to do the heater core.

I did a heater core on my Audi A6 Avant. Didn't have to pull the dash since most of the heater core was in the firewall and front cowl.

Anhelenuk 10-15-2016 09:25 PM

That's one job I hope I never have to do judging from your pictures.

X53Jay4.8is 10-15-2016 10:21 PM

Quote:

Originally Posted by upallnight (Post 1090490)
Since you have everything apart I would also do the heater core. Don't want to tear everything apart to do the heater core.

I did a heater core on my Audi A6 Avant. Didn't have to pull the dash since most of the heater core was in the firewall and front cowl.

But of course :iagree: I only want to do this once.

crystalworks 10-16-2016 06:12 PM

Nice work. You going to replace all the foam seals on the blower box while in there? They tend to disintegrate over time though yours look to be okay in the pics.

X53Jay4.8is 10-16-2016 10:22 PM

Quote:

Originally Posted by crystalworks (Post 1090540)
Nice work. You going to replace all the foam seals on the blower box while in there? They tend to disintegrate over time though yours look to be okay in the pics.

I did have some foam seals on hand but mine were in good shape and were not disintegrating.

Ricky Bobby 10-20-2016 01:22 PM

Don't forget to do the blower motor!!!

Joshdub 10-20-2016 01:29 PM

Yes also do the blower motor. It's only another $200. You don't want it to start making noise just as soon as you put everything back together.


All times are GMT -4. The time now is 01:03 PM.

vBulletin, Copyright 2026, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved.