![]() |
VANOS Seal Replacement Experiences
Anyone here replaced their VANOS seals with the Beisan product? How difficult was it? I'm about to tackle it myself and have downloaded and printed out the instructions from the Beisan website. It seems pretty straightforward. Was it really straightforward? Anyone that's done this have any tips or tricks? Also, did it result in improved fuel mileage?
Thanks in advance! |
Aside from my valve cover breaking, it was very straight forward. Just watch a diy video and you'll be set.
I didn't notice and fuel efficiency nor performance increases. |
Quote:
|
Same here - did not noticed fuel efficiency nor performance increases after the upgrade. Although, the X was running/purring perfectly before the upgrade. I did the seals and rattle kit. I mainly wanted to do the seal, but the rattle kit was one of those "while you're in there, what the heck" sort of job
The S54 on the other hand, made a huge difference in terms of making everything more smooth and quiet. But I haven't noticed any fuel efficiency nor performance increases either. I did the Beisan stuffs on the S54 mainly for preventing the hub tabs from breaking more than anything else - for that, I'm happy. But, as they say - Your Miles May Vary |
Quote:
|
I did not do the rattle kit, not for a lack of trying. I bought the parts and the soft vice clamps. My impact gun couldnt get the nut off the piston. Luckily I dont have the rattle.
|
Quote:
|
Quote:
|
Quote:
|
Quote:
|
| All times are GMT -4. The time now is 10:05 PM. |
vBulletin, Copyright 2026, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved.