UK members with DSP Setup?
 

Hi All,

I am after some help from a fellow uk member with a DSP setup and access to NCS expert.

I now have a l322 Range Rover and my amp went bad. I bought a used one but it needs changing in ncd from board monitor to mid basis so the sound doesn't cut out.

What I would love would be to bring my amp to you (or post) and unplug yours temporarily plug mine in and code it correctly and me to give you some money for your hassle...

Anyone able to help?

Cheers

bump

try asking on xdrivers dot co dot uk

£50 for anyone that can help :-)

Try this guy....he's a dealer for NBT retrofits.

He maybe able to assist you coding your DSP.


Simon Chodorowski
Southampton
SO16 5SB
Hampshire
Phone: +44 780 924 0868
email:[email protected]


Germaniks seems to be silent lately and not sure if he's able to assist.



Customers with OEM DSP amplifiers
If the sound cuts off after 30 seconds or so, please note that your DSP amplifier will need to be
recoded
You will need to have the following tools available for coding: BMW Standard Tools 2.12 with
NCSExpert, a Windows laptop, a WIFI connection close to your car for remote coding (If applies).


The coding settings are as follow:
1. Read the AMP module with NCSExpert in Manipulation mode
2. Edit the module settings a find the value : BEDIENELEMENTE
3. Change the value from "bordmonitor" to "mid_basis"
4. Save the new configuration file
5. Run SG_CODIEREN in NCSExpert

or this guy.
Carphonics - Car System Repairs and Upgrades

Hi I spoke to carohonics he can't code :-(