Xoutpost.com

Xoutpost.com (https://xoutpost.com/forums.php)
-   X5 (E53) Forum (https://xoutpost.com/bmw-sav-forums/x5-e53-forum/)
-   -   How can I crank, but not start? (https://xoutpost.com/bmw-sav-forums/x5-e53-forum/106226-how-can-i-crank-but-not-start.html)

AV8R4AA 05-05-2017 06:55 PM
How can I crank, but not start?
 
I installed a new chain tensioner on my M62.
I would really like to crank the engine for a few seconds.
I want to build up oil pressure. I don't want to start the engine.
What fuse can I pull to get 10 seconds of rotation without
Starting the engine.

X53Jay4.8is 05-06-2017 02:09 AM
Quote:
Originally Posted by AV8R4AA (Post 1108537)
I installed a new chain tensioner on my M62.
I would really like to crank the engine for a few seconds.
I want to build up oil pressure. I don't want to start the engine.
What fuse can I pull to get 10 seconds of rotation without
Starting the engine.
Pull the fuel pump relay

jopecasa 05-06-2017 05:22 AM
Quote:
Originally Posted by X53Jay4.8is (Post 1108546)
Pull the fuel pump relay
:iagree:

bcredliner 05-06-2017 11:03 AM
Not imperative as tensioner self primes in a few seconds. I suspect that cranking the engine with the fuse removed will cause an error code. If service engine light comes on it should go away once you have it running.


All times are GMT -4. The time now is 07:48 PM.

vBulletin, Copyright 2026, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved.