Xoutpost.com - Stop Auto Door Locking and Steering Retraction

Page 2 of 3

Show 200 post(s) from this thread on one page

Xoutpost.com (https://xoutpost.com/forums.php)

- X5 (E53) Forum (https://xoutpost.com/bmw-sav-forums/x5-e53-forum/)

- - Stop Auto Door Locking and Steering Retraction (https://xoutpost.com/bmw-sav-forums/x5-e53-forum/107043-stop-auto-door-locking-steering-retraction.html)

Crowz

10-05-2017 02:40 PM

Quote:

Originally Posted by upallnight (Post 1117450)

Look under
Module : IHKA

ELSV_EH_LAENGE -> aktiv -> nicht_aktiv

ELSV_EH_NEIGUNG -> aktiv -> nicht_aktiv

Click on the nicht_aktiv to deactivate the up and down and in and out of the steering wheel controls.

It was in the SM module on my e53.

IHKA is the heating and airconditioning module best I remember.

andrewwynn

10-05-2017 05:43 PM

Quote:

Originally Posted by arcsound (Post 1117447)

Ha, nice solution. Elegant. Unfortunately, I drive with the wheel totally down, I like it as vertical as possible, for who knows what reason. Always have. Can never see all my gauges....:-)

I lower the wheel for long drives and it does block a fair amount of gauge real estate

blakamin

10-06-2017 02:36 AM

Quote:

Originally Posted by andrewwynn (Post 1117434)

We can operate the seat manually but the memory doesn't work

When my E38 did that, it was a fault in the GM... but my E38 is a 95.
Replaced the module and seat memory worked again.
Now to get the interior lights on it to stop being an a-hole. They went stupid when the GM went nuts. :dunno:

gatojurko

10-07-2017 05:08 PM

Carly best and easiest! For me...

Lock vehicle at x kph
• active
• not active
Automatically lock the vehicle at the set threshold speed.(codable in GM5)https://uploads.tapatalk-cdn.com/201...56055279d5.jpg

Sent from my SM-G900F using Tapatalk

Crowz

10-07-2017 05:53 PM

When picking the speed to lock the doors at with coding not all speeds work for some reason. So if you code it and it doesn't work try a different speed setting.

yes_its_neil

10-17-2017 08:52 PM

1 Attachment(s)

Quote:

Originally Posted by yes_its_neil (Post 1117399)

BMW Scanner 1.4.0 is the easiest way to change the door locking functions. I don't recall ever seeing a way to stop the steering column altering. The scan tool is available for download, well was when I was searching, or will come on a cd if you purchase the OBD - USB cable on eBay or similar. Takes some initial fiddling around with USB - com port config, but then its relatively idiot proof. It is useful for identifying fault codes as well as monitoring live data with lights and other coding options.

I was looking at some old screen prints from when I coded some options in my ZKE module, and I noticed Steering Column Memory is an option. I never tried it at the time and have since traded my X5. The doors closing and steering column are both in ZKE and presumably can be changed with BMW Scanner I mentioned previously.

Crowz

10-17-2017 11:14 PM

I had coded mine with pa soft to lock the doors at a certain speed and it was working fine. Now for some reason it isn't doing it. I haven't had time to hook pa soft back up to find out if something changed in the coding.

I did us ncs expert to code the high beam lights to come on with my bi xenons but that shouldn't of effected the door locking as that is a different module.

The auto door locking is one touchy setting it seems. I had try a few different speed settings to find one that worked last time around.

andrewwynn

10-18-2017 12:44 AM

It's tied to which key unlocked the car. Did you switch keys and possibly not set all keys to lock at speed?

Sent from my iPhone using Tapatalk Pro

Crowz

10-18-2017 01:15 AM

I only have one key.

Crowz

10-18-2017 01:18 AM

I also programmed the steering column to not move on its own anymore but again that was a different module but who knows. When its not 46 degrees outside and I get some time I will fire up pa soft and check it.

All times are GMT -4. The time now is 06:21 PM.

Page 2 of 3

Show 200 post(s) from this thread on one page