DSC Module Bolt
 

Anyone know the PN for the screw for the DSC module ?

I know module master sell a set of 6.
Headscratcher....I think it's been anywhere from from 70K miles-50K miles of usage since my DSC module was replaced. This was years back for sure - too lazy to dig up the service records..

Needless to say, when I when to remove it for rebuild, there only the top and middle screws were holding it....the bottom 2 were empty

- Probably an M5 bolt.

- Remove a bolt, bring it to local hardware and match it with an Allen bolt.

I'll have to take a magenet and check.....as I do recall the MM ones were stainless. I would suppose that the mating end is SS if it was.

Don't/Should not want to mix/match SS with steel
----

EDIT. for the wiki. The OE bolt are steel like I suspected. Don't know why ABS rebuilders are selling SS. Hello, GALVANIC siezing. It was super easy to remove the 4 bolts I had...

I was somewhat of a skeptic as I read in a couple places including here. where theirs was seized...needed to be ez out, etc.