INPA VVT/Valvetronic Servo relearn process?
 

Hi!

I'm having a lot of trouble finding the menu and process for the VVT relearn. I made a short video to describe.

Any help would be appreciated!

https://youtu.be/ENS8p_JJgng

VVT has a self calibration.

https://www.e90post.com/forums/showthread.php?t=924730

In INPA you should have a place to set the min/max valve lift. Read the calibration process in the linked URL. If you hear the motors whirr then reset any codes and go for a test drive

To close this thread out.

I didn't find a place in the INPA software to perform a "relearn". I cycled the key quite a few times, and got engine start and good throttle response in park, though I am fairly certain I installed the servos clocked 180 degrees. The key cycle process works.