Xoutpost.com

Xoutpost.com (https://xoutpost.com/forums.php)
-   X5 (E53) Forum (https://xoutpost.com/bmw-sav-forums/x5-e53-forum/)
-   -   BMW E53 x5 Fault Codes Galore! (https://xoutpost.com/bmw-sav-forums/x5-e53-forum/110987-bmw-e53-x5-fault-codes-galore.html)

Millmo 10-29-2019 05:31 PM

BMW E53 x5 Fault Codes Galore!
 
I hooked up my new Foxwell scanner and got a lot of codes. It seems like there would be something (perhaps the general module) that is malfunctioning because I see a lot of open circuits in here. I have been looking into them one by one and it seems like it could be an ABS module or GM.

I don't really know where to begin with this and any guidance would be much appreciated.

Thanks,
Brian

7 DTC SZM seat cushion left heating open circuit
7 DTC SZM seat cushion right open circuit
17 DTC SZM under voltage
IHKA integrated automate heating and air conditioning
A DTC IHKA AUC sensor
1E DTC IHKA auxiliary water pump
IKE instrument cluster electronics fault 3 8?
8D DTC IKE EGS signal line disturbed
F5 DTC IKE no CAN identification (ASC)
11 DTC IKE acoustic transmitter disconnected (gong tone 1 2 3)
LCM light check module fault 8
7C DTM LCM turn indicator front left faulty
7D front right faulty
8E and 8F side light faulty
92 99 left brake and number plate faulty
0D DTC control unit fault
28 DTC thermal oil level sensor faulty
Airbag mrs multiple restraint system fault 1
50 DTC mrs power supply
RAD radio fault 1
DTC RAD transport mode active
ZKE central body electronics fault 9
59 DTC GM central locking drive drivers door open circuit
4 DTC GM terminal R
95 DTC GM passenger compartments sensor
1 DTC GM fuze or lead for load circuit
80 DTC GM servotronic servo valve open circuit
93 DTc GM LED short circuit to positive
A1 DTC GM mirror heater drivers door short circuit
82 DTc GM speedo signal interrupted
94 DTC GM LED for anti theft alarm system short circuit

P0030 HO2 heater control circuit
P0050
P0134
P0154

Fifty150hs 10-29-2019 06:14 PM

Quote:

Originally Posted by Millmo (Post 1170749)
I hooked up my new Foxwell scanner and got a lot of codes. It seems like there would be something (perhaps the general module) that is malfunctioning because I see a lot of open circuits in here. I have been looking into them one by one and it seems like it could be an ABS module or GM.

I don't really know where to begin with this and any guidance would be much appreciated.

Thanks,
Brian

7 DTC SZM seat cushion left heating open circuit
7 DTC SZM seat cushion right open circuit
17 DTC SZM under voltage
IHKA integrated automate heating and air conditioning
A DTC IHKA AUC sensor
1E DTC IHKA auxiliary water pump
IKE instrument cluster electronics fault 3 8?
8D DTC IKE EGS signal line disturbed
F5 DTC IKE no CAN identification (ASC)
11 DTC IKE acoustic transmitter disconnected (gong tone 1 2 3)
LCM light check module fault 8
7C DTM LCM turn indicator front left faulty
7D front right faulty
8E and 8F side light faulty
92 99 left brake and number plate faulty
0D DTC control unit fault
28 DTC thermal oil level sensor faulty
Airbag mrs multiple restraint system fault 1
50 DTC mrs power supply
RAD radio fault 1
DTC RAD transport mode active
ZKE central body electronics fault 9
59 DTC GM central locking drive drivers door open circuit
4 DTC GM terminal R
95 DTC GM passenger compartments sensor
1 DTC GM fuze or lead for load circuit
80 DTC GM servotronic servo valve open circuit
93 DTc GM LED short circuit to positive
A1 DTC GM mirror heater drivers door short circuit
82 DTc GM speedo signal interrupted
94 DTC GM LED for anti theft alarm system short circuit

P0030 HO2 heater control circuit
P0050
P0134
P0154

Start by clearing all codes and then see what comes back. A bunch of those could be "legacy" codes from when there was a problem before.

Millmo 10-29-2019 06:56 PM

Done. Thank you 5150.

wpoll 10-29-2019 08:16 PM

Quote:

Originally Posted by Fifty150hs (Post 1170752)
Start by clearing all codes and then see what comes back. A bunch of those could be "legacy" codes from when there was a problem before.

+1 - simply turning on the car with one (or more) of the module plugs disconnected would cause all that... not "real" faults. ;)

andrewwynn 10-29-2019 08:19 PM

Dead battery will set many of those codes. Use the quick erase function of the foxwell then drive a few days and check back.


Sent from my iPhone using Tapatalk Pro


All times are GMT -4. The time now is 01:43 PM.

vBulletin, Copyright 2026, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved.