Xoutpost.com

Xoutpost.com (https://xoutpost.com/forums.php)
-   X5 (E53) Forum (https://xoutpost.com/bmw-sav-forums/x5-e53-forum/)
-   -   2003 E53 3.0d M57 crancking but not starting issue (https://xoutpost.com/bmw-sav-forums/x5-e53-forum/111217-2003-e53-3-0d-m57-crancking-but-not-starting-issue.html)

DragonKhan 12-17-2019 05:21 PM

2003 E53 3.0d M57 crancking but not starting issue
 
I have been having trouble starting my car, its cranking but not starting up.

I was told it could be a faulty fuel pressure sensor, so i changed it with no result.
The battery is fine, fuel pump is working, I have changed the fuel pump relay. Also all the fuses are fine, I have changed the fuel pressure sensor as well.
After all this the car is still not starting

Now I have no idea what else to do.
I am open for suggestions

Clavurion 12-17-2019 06:03 PM

The obvious question what trouble codes it showing with diagnostics? If it's a pure rail pressure problem you can start it with help of some brake cleaner or easy start into intake manifold while cranking.

DragonKhan 12-17-2019 07:17 PM

Can you explain to me how can I use break cleaner and what do you mean by
easy start into intake manifold while cranking?

Clavurion 12-17-2019 07:22 PM

Quote:

Originally Posted by DragonKhan (Post 1173782)
Can you explain to me how can I use break cleaner and what do you mean by
easy start into intake manifold while cranking?

Brake cleaner or easy start will work as burning accelerant. Remove boost hose going to intake manifold (EGR valve) and spray in the intake manifold. This works if for example a leaky injector causes too low rail pressure on start up.

DragonKhan 12-17-2019 07:50 PM

How much of brake cleaner should I spray?
Do I need to spray before I start the car or while I am staring it?

andrewwynn 12-17-2019 07:56 PM

2003 E53 3.0d M57 crancking but not starting issue
 
A puddle of laquer thinner in the intake will run an engine for 20-30 seconds.

Common method to determine if fault is in the fuel supply.

The thinner evaporates over time to be perfectly explosive in the cylinder

It's the same concept as the brake cleaner but one person job and lasts a while

andrewwynn 12-17-2019 08:01 PM

Oops just noticed diesel engine. I don't know if you can use flammable vapor trick


Sent from my iPhone using Tapatalk Pro

Clavurion 12-17-2019 08:05 PM

Quote:

Originally Posted by DragonKhan (Post 1173785)
How much of brake cleaner should I spray?
Do I need to spray before I start the car or while I am staring it?

Works better if you can do it while another person is starting but can work if you spray for a few seconds just before you crank.

I guess evaporating thinner would work the same like andrewwynn suggested.

wpoll 12-17-2019 09:54 PM

You aren't going to get very far with this unless you scan it for codes etc. - you are flying blind. :dunno:

What was the basis for the mechanic telling you it was a fuel pressure sensor? Just a wild guess on his part?

And please don't start multiple threads for the same issue - it gets hard to keep track of what has been tried already. :thumbup:

Here's your earlier thread....

https://xoutpost.com/bmw-sav-forums/...re-sensor.html

DragonKhan 12-18-2019 03:14 AM

They did a diagnostic and fuel pressure was very less in fuel rail, so they assume that it has to be faulty fuel pressure sensor.


All times are GMT -4. The time now is 05:27 PM.

vBulletin, Copyright 2026, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved.