As soon as I've gotten the X5 tuned later this week, i definitely want to make some videos but last summer I made this video and one other.
https://youtube.com/shorts/lTnXZ1nZWKM?feature=share |
Quote:
Right on! I can’t wait! A couple revs would be awesome! E53 RiPPeR XOuTPoST jUNkiE ReVELaTiON 22:21 |
I have Velocity spacers that bolt to the hub and the wheel bolts to the spacer lug bolts. Every time I get tires (Discount Tire) the changer goes to the manager about the spacers. The manager always allows the tire install but only because the spacers are bolted to the hub. Checking around before I got the spacers, this was many years ago, I found that that was the best way to go for safety.
|
ok cool! THanks for the advice. I will double check to see which spacers I have on the back tires. Over the weekend I installed a new transmission cooler behind my rear diff where my batter box use to be and ran the lines along the drive shaft tunnel to the tranny. I also removed the A/C condenser so the rad can breathe better and cut a bunch of plastic away from each side. I had been using the A/C condenser as my transmission cooler but figured this was a better route to go. I had to also replace the hose connections on power steering cooler since they were such a pain in the ass to disconnect all the time. I'll try to make a short video today of it idling and rev it up a couple times. I'll warn you now, it doesn't sound like when you rev up a C63 AMG or a Supra. I'm not that pleased with how it sounds to be honest but I'll let you be the judge.
|
Ok guys, I had some time today to put together a little video on the LSX5 so here it is, have a listen and let me know what you think.
https://youtu.be/KvPOpNVXHdk |
YEAH..!! Nice install! My imagination ran wild, when I saw your first photos. That’s next level with that turbo! I like it! :2thumbs:
Sounds super smooth! Sounds awesome..! E53 RiPPeR XOuTPoST jUNkiE ReVELaTiON 22:21 |
This is one amazing build! Subscribed!
|
Quote:
|
Thanks!! It was definitely a challenge making that turbo fit under the hood with all of the piping and hoses but we did it and soon I'll actually know what it feels like to put it to work.
|
Quote:
|
All times are GMT -4. The time now is 08:48 AM. |
vBulletin, Copyright 2024, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved.