Originally Posted by andrewwynn (Post 1180227)

The cross members across the battery. If they are the same size and all there look for a couple that look newer eg p o dropped and replaced vs dig them out.

Originally Posted by crystalworks (Post 1180229)

Those are all 13mm's I believe. 4 x 10mm bolts go around the air suspension compressor though.



I'd check the amplifier mounting bracket, the electronics bracket itself, and the bluetooth module areas. Looks like one of the 10mm bolts from the bracket. I forget how many there are 3 or 4. 2 on top shown below and one on the side by the tail light and one in the back on the bottom? The 2 nuts I'm not so sure but could have come from the same areas as well.



https://i.postimg.cc/dtV27t6j/20.jpg

Originally Posted by coolbum1358 (Post 1180234)

hello i am new to this form, i am looking for some help getting inpa and other software installed and up and running. I need to do an abs bleed and few other things. Thanks



If this is not the right place to post please point me in the right direction.

Originally Posted by lkv0315 (Post 1180225)

Hey there friends! Hope all are doing well amid this hysteria that’s ensuing. I just got done doing amps and speakers in the X5, and was reassembling the trunk area, but alas I have two bolts and nuts that I don’t know where they belong. Attachment 77547 They’re all 10mm. The other bolt matches the one shown, I just put it down somewhere and can’t find it. Thanks for any help!


Sent from my iPhone using Xoutpost.com