Xoutpost.com

Xoutpost.com (https://xoutpost.com/forums.php)
-   X5 (E53) Forum (https://xoutpost.com/bmw-sav-forums/x5-e53-forum/)
-   -   Rear parking sensors (https://xoutpost.com/bmw-sav-forums/x5-e53-forum/111979-rear-parking-sensors.html)

nilssonulf 05-31-2020 10:52 AM

Rear parking sensors
 
2004 X5 E53 4.4i
Can anyone tell me if there is cabeling prewired for rear parking sensors? If not, is there a big work to install it and wire it??

Overboost 05-31-2020 12:14 PM

Quote:

Originally Posted by nilssonulf (Post 1185108)
2004 X5 E53 4.4i
Can anyone tell me if there is cabeling prewired for rear parking sensors? If not, is there a big work to install it and wire it??

You will be prewired inside the rear compartment. All you need is the PDC sensors and harness for the rear bumper. It has a grommet that goes through the body behind the bumper and plugs in a couple of inches from where it passes through. You will also be prewired in the front as well. Just need that harness as well.

One more thing, you will need the PDC module as well but all the 3 plugs are there and prewired. Just drop in the module and connect the harnesses.

If you are retrofitting PDC on a non PDC X5, you will need a rear speaker/gong and a console strip below your HVAC controls with a PDC button to have a LED light that will display when the system is active and to turn it on/off.

If you are doing rear only, you will need to code out the front PDC sensors.

I started my retrofit with rear only (I have front and rear now) so I can help you with everything. :thumbup:

Clavurion 05-31-2020 12:32 PM

There is no absolute need for the button. It can be coded so that it activates /de-activates simply by selecting reverse.

nilssonulf 05-31-2020 12:39 PM

Quote:

Originally Posted by Overboost (Post 1185113)
You will be prewired inside the rear compartment. All you need is the PDC sensors and harness for the rear bumper. It has a grommet that goes through the body behind the bumper and plugs in a couple of inches from where it passes through. You will also be prewired in the front as well. Just need that harness as well.

One more thing, you will need the PDC module as well but all the 3 plugs are there and prewired. Just drop in the module and connect the harnesses.

If you are retrofitting PDC on a non PDC X5, you will need a rear speaker/gong and a console strip below your HVAC controls with a PDC button to have a LED light that will display when the system is active and to turn it on/off.

If you are doing rear only, you will need to code out the front PDC sensors.

I started my retrofit with rear only (I have front and rear now) so I can help you with everything. :thumbup:

OB, youre my man. I will try to find out where to buy and then I get back to you.

nilssonulf 05-31-2020 12:40 PM

Quote:

Originally Posted by Clavurion (Post 1185115)
There is no absolute need for the button. It can be coded so that it activates /de-activates simply by selecting reverse.

Really?? How you do that??

Overboost 05-31-2020 01:06 PM

Quote:

Originally Posted by nilssonulf (Post 1185118)
Really?? How you do that??

Clavurion is correct, you can get by without the button but it also provides a LED showing a blinking fault besides being able to turn it on or off. It is already coded for automatic reverse gear activation by default.

For instance, my system (front and rear) is set to activate by reverse but then deactivate by speed/distance. So if I back into a parking spot while waiting for someone and just turn off the engine from ignition position 2 to ignition position 1 to keep the radio alive, the PDC is still active and beeping from the rear. I just press the button to turn it off. Also nice to have an on/off switch to operate without having to put the car in reverse to check the system or sensors. I would get one, I think I got mine on fleaBay for $25 and that's the way our cars came from the factory with PDC. Here's one near you for £16.01

https://www.ebay.co.uk/itm/BMW-X5-SE...gAAOSwrxpeOp~O

nilssonulf 05-31-2020 01:09 PM

Quote:

Originally Posted by Overboost (Post 1185120)
Clavurion is correct, you can get by without the button but it also provides a LED showing a blinking fault besides being able to turn it on or off. It is already coded for automatic reverse gear activation by default.

For instance, my system (front and rear) is set to activate by reverse but then deactivate by speed/distance. So if I back into a parking spot while waiting for someone and just turn off the engine from ignition position 2 to ignition position 1 to keep the radio alive, the PDC is still active and beeping from the rear. I just press the button to turn it off. Also nice to have an on/off switch to check sensors without having to put the car in reverse to check the system or sensors. I would get one, I think I got mine on fleaBay for $25 and that's the way our cars came from the factory with PDC. Here's one near you for £16.01

https://www.ebay.co.uk/itm/BMW-X5-SE...gAAOSwrxpeOp~O

:thumbup::thumbup::thumbup::thumbup::thumbup:

Overboost 05-31-2020 01:15 PM

Quote:

Originally Posted by nilssonulf (Post 1185122)
:thumbup::thumbup::thumbup::thumbup::thumbup:

Pick up the module and rear speaker as well.

https://www.ebay.co.uk/itm/BMW-X5-SE...IAAOSwRtBesUJA

https://www.ebay.co.uk/itm/BMW-X5-SE...QAAOSwyGRbpno-

nilssonulf 05-31-2020 01:20 PM

Quote:

Originally Posted by Overboost (Post 1185124)

OB, thank u for your support!!

Overboost 05-31-2020 01:21 PM

Here is a picture of the PDC module (white) location in the back of your X5

https://i285.photobucket.com/albums/...IMG_0583-1.jpg


All times are GMT -4. The time now is 06:21 AM.

vBulletin, Copyright 2026, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved.