Remote Single Click to Unlock All Doors
 

I have the PA soft 1.4 with INPA cable and software. I've been able to make a few changes to my X5 (suspension inactive, DTRL off, remote window up) however I have not been able to locate a menu that would allow the remote to unlock all doors with a single click. The double click is so annoying because of the delay between clicking and the fact that I am always needing to unlock all 4 doors.

Bonus Question: Is there a way to lock the doors in start up and then unlock when I turn off the car? I could not find that feature so I have disabled the lock on start up.

Another Bonus Question?: I saw something about coding to have xenons on + high beams + fog lights. How are we doing that?

I did that, a nice way to piss off the driver in front of you. LKM module.

Edit Correction: LCM module. not LKM module.

To enable one click to unlock all doors:
-default "Selective" is checked. This allows one click of the unlock button of the remote to unlock the drivers door. A second click unlocks remainder passenger doors
-check "No" to unlock all doors with one press of the unlock button

You do not have any option of unlocking the door command without a message sent over the K-Bus. Some of the Android infotainment systems with the iBus app can do that though.

I think you have single xenon on your MY2000 so high beams should come on with the xenon low beams. If you want the fogs to stay lit in high beam mode you will need NCS Expert and NCS Dummy. PA Soft 1.4 will not be able to achieve that function.

I did this using NCS on my e53 and e38 but forgot the parameter that was changed. This is one of the simple changes that makes a big difference.

Here are the coding options in aware of on E53 with regard to locking:

Optical confirmation – locking vehicle
• on
• off
Optical confirmation for locking vehicle is active/not active. Only works if ‘Anti Theft System’ is set to ‘active’. (codable in GM5)

Audible confirmation – locking vehicle
• on
• off
Audible confirmation for locking vehicle is active/not active. Only works if ‘Anti Theft System’ is set to ‘active’. (codable in GM5)

Comfort close using remote
• on
• off
Press and hold the lock button on the remote to close all windows and the sunroof. (codable in GM5)

Automatically lock vehicle
• on
• off
If no door or window has been opened two minutes after the car has been unlocked, the doors automatically lock. (codable in GM5)

Threshold speed for vehicle locking
• on ignition
• 4 kph / 2 mph
• 8 kph / 5 mph
• 12 kph / 8 mph
• 16 kph / 10 mph
• 20 kph / 12 mph
• 24 kph / 15 mph
• 28 kph / 17 mph
Sets the speed at which the vehicle automatically locks all doors.nTo activate this function you need to activate ‘Lock vehicle at x kph’ for the according keys. (codable in GM5)

Lock vehicle at x kph
• on
• off
Automatically lock the vehicle at the set threshold speed. (codable in GM5)

Is that it? Haha. I misunderstood no to mean do not look for that key remote.

Cool thanks for the info! I'm going to go change that next time I am plugged into the car.

Since you have the 2000 MY e53, coding is not through the OBD II connector under the dash, but through the 20 pins round connector under the hood.

I coded the fog light to stay on when the high beam is also on with P.A. Soft BMW scanner 1.4.

https://xoutpost.com/1117152-post2.html

My PAsoft Body control options page looks different
 

Hi All, bit of an old thread revival, but I am trying to code out the 2 click unlock on my 2005 e53 30d. I attempted to follow overboosts instructions but when i got the the the coding data for the body control module my page looked a littel different from the overboost had a snip of.

any chance someone would be able to adivse why mine looks different & what i might need to "click" to make this car one click unlock?

any help here is appreciated.

Just change (uncheck) the settings on "Selective central locking".

You also have a different version (older?) of PASoft.