Key programing
 

hi, i bought the key as in the picture and tried to code it but it doesn't work. I wonder if any of you have worked with the Ak90 + key programmer. When I put the new key in the device and press the "test key" I get the message "no key" and the original keys want to test. The key looks like this
https://postimg.cc/YLQGpLmM

I don't have this little chip that they put inside so it can be programmed, I guess that's the problem
https://uploads.tapatalk-cdn.com/202...08ac8a2a0e.jpg


Sent from my iPhone using Tapatalk

This is for E46 but procedure is the same on E53 - https://ncs-expert.com/e46-key-programming-ak90-guide

And if definitely won't work on a key without a chip. Search for pcf7935 on eBay.

I bought a key with a 7935 chip and now it works properly. I'm also wondering if anyone can write to me step by step how to turn off the fog and reverse light check when I turn on the ignition, because I replaced them with LEDs and now they flash when I start the car


Sent from my iPhone using Tapatalk

I solve this


Sent from my iPhone using Tapatalk