| titan silber |
11-01-2022 01:49 PM |
Quote:
Originally Posted by Clavurion
(Post 1225329)
So have you already tried with renewed rear arms and rose bushes and the rear camber can't be set near -2 degrees? Camber can be even less a bit depending on the front camber so that there is at least 1 degree more negative camber on the rear compared to front.
|
Yes, after the refresh the minimum rear camber that could be achieved was -2 49' on the left and right. Front cambers are -1 16' and -1 03' with the pins still in place.
My plan is to try to get the front cambers to both about -0 45' and then use the adjustable arms to get to -1.5 on the rears with toe on low side of the allowed tolerance. |
