steering column bearing
 

Hi
Done a search for an how to relace lower steering column bearing but
could not find anything.

Any help would be great.
Was wondering if it could be done from under the hood or do i have to remove
the column.

Thank you.

Dave king

Are you meaning the green plastic seal ring?? Either way I'm almost certain you can't do that working only from the engine compartment side.

ive done these bearings on mine not a bad job one bolt on the inside one on the rack and hey presto parts off , i have a pair of genuine bearings left over if you need them , i see you are in the uk like me Dave.

That's something I've been looking at on mine as when I reach in and grab the steering column uj shaft it has movement in it. Not sure if it's the ujs or the column bearing tho. Reluctant to to buy a new uj shaft as there were two different types and Realoem doesn't show any part numbers for them. I suppose the only way is to get the old one off and find out..

I thought the bearing in my car was going bad, but it turned out to be the lower column, specifically the u-joint (“double joint”) Lots of play and a distinct clunking sound occasionally on turns.

there does seem to be a lot of moving parts in this assembly luckily dropping these lower bits off you can check a good portion of them , just be sure to check for play in the sliding parts in the lower column.