Xoutpost.com

Xoutpost.com (https://xoutpost.com/forums.php)
-   X5 (E53) Forum (https://xoutpost.com/bmw-sav-forums/x5-e53-forum/)
-   -   Tailgate Lights Not Working (https://xoutpost.com/bmw-sav-forums/x5-e53-forum/116310-tailgate-lights-not-working.html)

RenaissanceMan 06-13-2025 08:07 PM

Tailgate Lights Not Working
 
2005 3.0i. My tailgate lights are not turning on at all. I have tested the bulbs and they are both good. I'm not getting any voltage to the connectors either with the lights on. I don't see any fuses that are specific to those lamps, but I do see that there is a Light Module. Is there a harness connection somewhere for these I can check?

andrewwynn 06-13-2025 08:08 PM

Brake and run or just one of them?


Sent from my iPhone using Tapatalk Pro

RenaissanceMan 06-13-2025 08:16 PM

Quote:

Originally Posted by andrewwynn (Post 1245204)
Brake and run or just one of them?


Sent from my iPhone using Tapatalk Pro

Neither applying the brakes nor turning on lights/parking lights turns them on if that's what you're asking.

Homerlovesbeer 06-14-2025 02:34 AM

Have you tried bending the small metal tags in the bulb holder so it makes better contact with the socket? I had issues where proper contact wasn't being made.

Did you test for voltage at the 5 pin connector that goes onto the holder?

andrewwynn 06-14-2025 01:34 PM

Sounds like he measured at the connector all won't be the usual overheated contacts common problem.

Fuse or bad LCM. Sounds like both sides no run or brake/turn.

Does center brake light?


Sent from my iPhone using Tapatalk Pro

RenaissanceMan 06-14-2025 02:43 PM

Quote:

Originally Posted by Homerlovesbeer (Post 1245206)
Have you tried bending the small metal tags in the bulb holder so it makes better contact with the socket? I had issues where proper contact wasn't being made.

Did you test for voltage at the 5 pin connector that goes onto the holder?

Yep, not a socket/contact issue. I've had those before. There is no voltage at the connectors that plug in so no power is getting back there for some reason.

RenaissanceMan 06-14-2025 02:44 PM

Quote:

Originally Posted by andrewwynn (Post 1245209)
Sounds like he measured at the connector all won't be the usual overheated contacts common problem.

Fuse or bad LCM. Sounds like both sides no run or brake/turn.

Does center brake light?


Sent from my iPhone using Tapatalk Pro

Center brake light works, yes. I couldn't find specific fuses in the Bentley manual listing for those tailgate taillights... Have you seen LCMs go bad before in these?

andrewwynn 06-14-2025 02:48 PM

Mine had a defect from day one didn't light the left side marker. Never bothered to fix all the other lights worked.

RenaissanceMan 06-14-2025 08:52 PM

I checked INPA for light module fault codes and there were none. When an LCM fails, does it typically throw faults?

I guess the next thing I will check is the taillight wiring loom and see if I’m getting voltage there and if not try and figure out which pins should be showing power from the LCM. Any other suggestions?

andrewwynn 06-14-2025 09:16 PM

Pins at the LCM i think then you know if it's LCM or wiring.

newtis will have the exact pinout


All times are GMT -4. The time now is 05:16 PM.

vBulletin, Copyright 2026, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved.