Got it on Ebay: https://www.ebay.com/itm/166566370092

:thumbup:

My button cover replacement is here!

Will update when I get it on.

https://i.postimg.cc/15PgQKBP/20260504-205109.jpg

So here it is. It is indeed a BMW part.

https://i.postimg.cc/Y9JxSdkh/20260505-101403.jpg

Found a BMW part number on it - 51 13 7 039 261. Comes out as a BMW-Mini part also.
https://i.postimg.cc/g0hjWsMV/20260505-103400.jpg

Here is the old switch cover, just break it off and clean the edges of the oval hole.
https://i.postimg.cc/PxLBcVKR/20260505-100557.jpg

Old switch cover removed and you can see the 2 microswitches. Watch out for the microswitch pad, the one on the right fell with the switched and I just snapped it back on.
https://i.postimg.cc/X7D9N2gk/20260505-101223.jpg

Old vs new switch cover. Bit of a difference and the microswitch pads now contact the ribs instead of being between the ribs previously. Was concerned it may not fit, but it does. Thinking about it now, should I remove the outer ribs?
https://i.postimg.cc/rwwcjj6B/20260505-101626.jpg

Installed
https://i.postimg.cc/j2Rdbr9d/20260505-102408.jpg

If its working, I'd leave the ribs alone. Didn't that come in Jaguar packaging?

Yes its working now so may just leave it alone.

Came in Land Rover packaging, got it from an LR parts place.

EDIT: Yes Jaguar/LR packaging, pics in package a few posts up

I replaced my cover years ago, but did not realize that there are supposed to be covers over the switch buttons. No wonder mine works like shit! Ugh!

At least you found the problem. Now you can put something between the microswitch and button cover to fix.