Can I do this??...I think I can, I think I can..
 

Just ordered Centric rotors and Axxis Deluxe Plus pads for the X from Zeckhausen....I've changed my own oil for years, baked my headlights, dremeled the hell outta my cluster and changed my pads on an old '86 325e....Got a bit of a panic/cold sweat when I think about doing all rotors and pads and sensors on the X, however. I've read the great DIY by Hayaku and Kewl, seems straightforward....Can I do this without f**king it up? Lemmeno your thoughts/suggestions, pulleeze...:thumbup:

Brakes and rotors are easy as long as you have a good jack/jack stands and even easier with a lift. It's a greasy job, but pretty easy.

PM me if you run into troubles, I did mine about a month ago.

or pm me and i'll give you my number.. i can walk you through it if you need :)

It's not much different than from your '86 325. Go for it!

you can do it!

u got it man its tit, just clean everything real well, i did mine there mint, 01 x5 3.0, only prob i had was getting the old rotors off, just wack em man wack em, good luck!

Go for it and if you run into problems post a question in this forum and there will be tone of people to help you. Good luck

be gentle with the sensors, they break easy.

Go for it. Make sure you have the right sized hex bits for the calipers and rotors.

yea there like a 7mm sears has got em vip and those place prob don't my didn'nt and i got new sensors on our fav bidding spot for 10 bucks each, recommend u get them, u can make it work without them and order later thats what i did, good luck!