![]() |
[QUOTE=ncx]Ok, my resonator is 27 3/4" long. Hope that helps. :thumbup:
Thats great!!! Many thanks. I have another question though. I take it you actually cut the pipes away from the resonator that come from the engine side? Because if you look at this pic, the resonator is actually a bit longer when the pipes are intact. THE PIPES I'M REFERING TOO ARE LEADING FROM THE LEFT OF THE PIC http://i77.photobucket.com/albums/j77/icongroup/159.jpg |
Th replacement resonator does appear to come with a section of pipe attached so that it can easily be welded into the OEM exhaust system. There is more pipe on the engine side and a few inches on the rear side as you can see from your diagram. If you look at the pics below you can see that I just cut the resonator out and left as much pipe in place as possible. This allowed the addition of only straight pipe, no bends, so it was quick, cheap, and easy to do.
I have noticed zero loss of torque, but I have an xpipe. Cutting off resonator http://xoutpost.com/gallery/files/2/5/cut_res.jpg Here you can see the xpipe going in. You can use just straight pipe if you are looking for a more raw sound. http://xoutpost.com/gallery/files/2/5/test_fit_xpip.jpg |
That is absolutely great ncx!!! Many thanks for the help on this, just booking my X in at the moment to have this done. Great pics and help thank you!!
|
Quote:
|
Quote:
|
Ok the X is booked in to have this done tomorrow so I will let you all know how it goes!
I'm having custom made, stainless straight pipes installed. |
For those who are not quite sure and wondering what the sound is like. Take a look at the link below that ljnlaw provided on another thread!
http://www.youtube.com/watch?v=S38Kc1mHUGY |
Quote:
|
How much is it costing you to do this??
|
When I covert to dollors it works out roughly $146.00
|
| All times are GMT -4. The time now is 12:24 AM. |
vBulletin, Copyright 2026, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved.