multiple cylinder misfire?
 

Folks...i'm in a little jam. i just changed both of my camshaft position sensors since my car had shut down on me a while ago. since my X was sitting for a while the battery must of died...boosted...and started for a little and stalled. (the battery is not dead.)

anyways... the SES light came on and when i scanned it P1341,(multiple cylinder misfire) P1343, P1345, P1347, an P1351 came up. misfire cyl 1,2,3,and 5 w fuel cutoff....i searched a few post before i created this thread, and the few people that had this problem didnt know what it was, one VERY major, and the others seemed minor. any suggestions as to what this could be for the "Xperienced" people on this forum...

The car stays on for very little time... about 3 secs after cranked. it only stayed on for 10 mins before and warmed up. i'm guessing it has something to do with fuel? ...or a simple tune up?

thanks alot for any help. ;)

YOUR GUESS IS ALMOST RIGHT, IVE REPLACED MY FUEL PUMP RELAY AND IT TOK CARE OF THE PROBLEM.

I had a misfire problem before. It was because of a malfunctioned coil.