Clearing Headlght problem, HELP
 

Well i took my x5 in today to a mechanic to get the clear headlight look by removing the lens covers, and everything went well for one side, easy, but then when he was doin the other side, the damn thing just wouldnt come off, and he's like there is a risk of breaking it, so now i dont know what to do, he telling me that there is a spray that he will order in that moistens up the silicone or somethin in those terms, but i just wanted to know if there are any other ways to pry it off or remove it without breaking tabs, oh he used a heat gun.....any help? seems like any mod is a headache with this thing!

--i also have a extra headlight cover but has scratches on it, anyway to remove scratches of the headlight.????

Is it a younger model headlight?
I remove scratches with 1000, 2000 grit wet/dry bodywork paper used wet then finish with clearcoat polish.

the headlights are 2002
 

the lights are nov, 2001.........anyone can help me on what i should do, i was doin all this mainly because the adjuster on the headlight came out of the socket, so bmw told myself that i could get the lights opened and pop the adjuster back in. The Light that didnt have problems opened, and the one were the adjuster came off, is the one i am havin problems with taking apart....any help????

anyone
 

com'on, someone must know, there are soo many ppl on here that know soo much even more than the dealership!

Dont use a heat gun. Use an oven at 250 for 10-15 min.

Just like what Krunk man says, you have to mess with the clips and just pull the lens off. Make sure you have a friend with you so he/she can hold the headlight in place. Good luck man.

okay
 

well i will try to bake it, but the other light came apart easy as butter with the heat gun, but its the left one that i having problems with, i guess i try to bake it!

maybe your X was in an accident and had one headlight replaced. the build dates could be different. There is a clock not only on the trim, but also on the very back of the light housing. Id check the one on the back of the light housing to see if its a 10/02 light or newer with just a 01 piece of trim put on it.

If thats the case, order another headlight on ebay that you can open.

oh what
 

is there anyway to open a 2003 light up if thats the case.?

Nope. It's tight like a frogs asshole and that's water tight!!