Brushed Aluminum Running Boards
 

Hello everyone,

I want to install the Brushed Aluminum Running Board Part # 51710017315
to my 2005 X5 3.0i and I want to know beside the running board what else do I need to get to complete the installation? What other parts this running board came with? I just check the DIY install for the running board but he got the 4.8 and I think the body is different to the 3.0i. Do I need this Mud Flaps Part # (front) 82160004467, Part # (rear) 82160154724 and Glue kit 83190147369. How about Fender Flares ? I just want the installation to be simple if I can get away w/out the mud flaps anf the flares it would be better. Thanks

Everything you need comes in the kit. You didn't need mud flaps, fender flares or glue.

Most important part is the plastic rivet gun you get at an auto supply store. Do a search of the archives. I know I have posted the links to it before.

The info might also be in the writeup here on X5World. I installed myself and it took aboit 90 mins. Make sure to buy extra rivets. They are cheap, and they break easily!!

I second that from RANGERFAN on the plastic rivet gun. Believe me, you do not want to do this without that tool!! It could be quite painful without it, but with it, the install is very straight forward and the write-up provided by X5 World is what I used and it took me through every step.

Does the kit contain the wider wheel-well fender flares, a la the 4.8?

Thanks for the info guys :thumbup: Do anyone know whar are the part number for the plastic rivets ? Which auto store carry the plastic rivet gun here in California ? Thanks again

Just to help out..we did the install without the rivet gun. depends on what rivets u end up using.

Hello,

that kit doesn't come with Wider fender flares (you can see it from my signature below)
http://www.realoem.com/bmw/showparts...62&hg=51&fg=20

and here is a link for rivet gun
http://www.napaonline.com/cgi-bin/nc...6&usrcommgrpid

A normal rivet gun will suffice(one that you can use with metal/aluminium rivet).When
applying the plastic rivets it will be useful to have someone hold the flares in place while you press the rivet gun.This will ensure that you rivet the flare in its proper position.Without a rivet gun ,you will have to hammer the rivets in which may not be a good idea should you hit the wrong place!!!!A good tip that will avoid removing the rear wheels.......Dont use a plastic rivet as per instructions,use a normal push-in plug!!!The front wheells you just turn!!!
I fitted mine with a friend and although I have a lift,we did the whole installation on the floor.Becareful,because the plastic trim that covers the bolts can be tricky!Take your time!

Part number for plastic rivet (blind rivet) is 51-71-7-002-953 and it costs about 40 cents/ea.

I just installed the running boards on my X5. Check the NAPA store close to you and get the rivet gun as mentioned by Wuzin. You don't need flares if you don't have 4.8, save yourself some money. Good luck.

There is a write up for this on X5World, and you might also want to check the archives at BimmerFest and, dare I say it, Turdfly. Lots of great info is out there! Good luck with your install and post some after pics!!

I really like the look of the flared wheel well arches on the 4.8... how could I go about getting them installed on my 4.4, along with the alum running boards?

Also, are the stock running boards load bearing? I suspect that they're not, so I haven't tried applying any weight to them... :nervous:

If you want flared wheel arches then discard the arches which come with the running boards and buy these for more money. You can use Crevierbmw or pacificbmw for some discount. Good luck.
Flares, rear left 51 71 7 051 035
Flares, rear right 51 71 7 051 036
Flares, front left 51 71 7 051 037
Flares, front right 51 71 7 051 038

http://www.realoem.com/bmw/showparts...52&hg=51&fg=95


Without r/b flared wheel arches
http://www.realoem.com/bmw/showparts...23&hg=51&fg=20

I thought the flared fenders would not work with the running boards?? I was under the impression that only the "normal" fender arches would work with the running boards.


hmmmm I could be wrong. :D I kind of hope I am b/c I wanted to use the flares, but was told they would not work the r/b.

You're correct. The standard flares that came on 4.8is will NOT work with the running boards. If you have 4.6is or 4.8is, you will need to purchase the extra rear flares that will match the original flares and fit the running boards.

Stock 4.8 comes with flares on only rear wheels. The part#s I have listed in my previous post have flares on all wheels and goes with the running boards. I just did this last weekend on my 4.8. Good Luck. :thumbup:

Got any pics? :dunno:

They are flimsy. Don't try. The only section where they have a little bit of steel (or alum?) support is the rear half section, by the rear doors. The front haft is just hard plastic with no support whatsoever.

I will take some pics tomorrow and post it.

Here are the pics as requested. Notice the flare on the front fender in the after running board pictures as against before. Had to buy separate set of wheel arches and discard the ones which came with R/b. In the close up pic, if you look closely, you can notice the clear bra on hood.

Before running boards
http://s113117221.onlinehome.us/Images/RBbefore.JPG

With Running Boards
http://s113117221.onlinehome.us/Images/RB-front.JPG
http://s113117221.onlinehome.us/Images/RB-rear.JPG
http://s113117221.onlinehome.us/Images/RB-side1.JPG
http://s113117221.onlinehome.us/Images/RB-side.JPG

awesome pics. beautiful ride..

Awesome look and I think this would look great on my silver 4.4. How much?

$1100 something for running boards and flared arches. If you are not getting flared arches you can get away with $550 or so.

Looks terrific, and really completes the look.

Nicely done. :thumbup:

LeMans, it is simply stunning!! :wow: :thumbup:

Thanks everyone. On to the next mod....

Hey LeMans, sorry I had to dig up this thread because I have a question on the aluminum rbs. I have a 4.8 like you and want mine to look exactly the same, fender flares on front and rear.

I looked at the realoem link. Do I need to order every part separately? Or is there like a kit part #? And as for the flares, which ones come in the kit, and therefore will I have to order the flares separately, both front and rear? Any help is appreciated, thanks!

Imitation is the sincerest form of flattery.... :thumbup:

Yes, you will have to order all the quoted flares part #s separetely. The ones which come with running boards are without any flares. Wish they had separete kit for 4.8. :tsk: If you are in NJ, you can get from PaulmillerBMW for 25% discount. I ordered over phone and told them that I have the 25% coupon from Bimmer magazine. If you still need coupon let me know.

Thats perfect, PaulMiller is my dealer anyway. Did you actually give them the coupon, or just had to tell them you had it. If you still have one and I need it I'd definitely appreciate it!

One more question, when looking at the realoem for the 4.8 alu rb retrofit kit, it doesnt tell me how many rivets, bolts, clip etc... are needed. I am going to get extra rivets to be safe, but I ahve no idea about how many in total of all these fasteners are needed? Am I missing something or do you have any insight on this? Thanks!

I had the coupon with me but they never asked. Also the old guy with beard(I think his name is Dave) in parts dept was arguing on phone with me that I do not need the flared arches, but I told him that I need that anyway, so don't let him argue with you on that. I will try to find the coupon, although I don't think they care if you also pay at the time of order on phone, like I did. So you will be going there only to pickup.

Do get this rivet gun from your local NAPA store. As for rivets I picked up around 10 extra rivets of both kind, they are very cheap.

Hi Guys...

I've got an Alunimun Running Board Kit from Morristown BMW (NJ) last week.
I've got the package for very very good price. There price is better then Crevier BMW (at least RB)
You should talk or email to Part manager at Morristown BMW before you get there....
They were very nice people at the part department....

You mind posting how much you got them for???

I am getting my 2002 4.6 next week and I want to do the running boards. I want to keep the flares as they are. I am still a bit confused after searching the site and reading about the running boards.

Do I just order part number 51-71-0-017-315?

Will I need different fender flares or can I use my stock ones?

If I can use the stock ones do they need to be removed as the installation PDF shows?

Do the old rivets need to be drilled out or do they pop out?

Can I use my regular rivet gun or do you guys suggest the plastic rivet gun?

Apprecite the info!!!!!!!!

First thing, your stock arches will not fit with the running board. I believe 4.6 flares are same as 4.8, which is flared arches. The arches which come with running board are flat(like the 3.0 or 4.4) and not flared. I still have the arches which came with r/b in the box and I had to buy the flared, and while at it I bought the front flared as well. You can either drill out plastic rivets cleverly or pull with a plier. the rivet gun suggested in this thread does make life easy and its worth it. You will realize when you do it.

"I still have the arches which came with r/b in the box and I had to buy the flared"

So they sell special flared arches for use with the running boards?

What do I get when I order 51-71-0-017-315? Everything I will need except the flared arches?

Anyone here use the non-flared arches on the 4.6? Curious how they look.

yes on both. You may need few extra rivets as they break and rivet gun. See this thread for details.

Sorry but I was always wondering if the kit comes with some rivets? Some people say yes and some people say it does not include any rivets.

Does come with rivets but some break therfore advisable to have spare. Your choice.

First off... thank you guys for the replys! I feel like I am beating a dead horse with these question but I want to get it all figured out!

How much should the running boards cost? How much should the flared arches to fit the running boards cost?

Would it look terrible to have the non flared arches? I think it would make the wheels seem like they stick out a lil bit!!

Hey guys, not to get off the subject of the aluminum running boards, but do the flaired covers fit the stock plastic running boards on a 4.4? I'm interested in getting a brake upgrade and some 4.8 wheels but actually like the stock running boards, Although the aluminums are really growing on me though. thanks..

How much should the Runnning Boards cost? How much should the 4.6 Running Board Flares cost? Anyone do an install using the regular flares (the 3.0 / 4.4 ones)?

Don't know if anyone saw my post the last time:


How much should the Runnning Boards cost? I am looking at a set for $550 with everything.

How much should the 4.6 Running Board Flares cost?

Anyone do an install using the regular flares (the 3.0 / 4.4 ones)? I think I kind of like the look of the 4.4 w/o the extended flares.

Alright, just want to clarrify. Too bad this was not an article because after searching and reading it is still very confusing.
4.4 what part numbers do I need for Running boards and Flared Arches?