Part Identification Help Needed
 

I recently purchased some headlights to perform a halogen to HID conversion and found one of the units to be damaged. After baking the unit I found the following parts to be broken. Please help me identify to see if I can purchase them.

There are two parts that connect to one another and are used to adjust the headlight beam. These came out of what I believe to be a 2001 headlight. I also snapped a photo of what I believe the date code is but not sure how to read it. Sorry the photos are a little blurry, taken with poor light and from my iPhone.

-

33 views and not a response. I hope this doesn't mean the part is un-replaceable. Leaving comment to bump back to top for one final attempt.

If it is from inside the unit it may not be listed.
Did you try looking on realoem.com?
Is there a part number on the item?
You may end up having to buy another headlight unless you can grab the part from one of your halogen units.

Doh!!! That's a great site, hadn't seen it yet. Looks like I'm screwed as far as trying to get a part as its not listed in the diagrams. I am going to continue looking for another assembly to take apart rather than my halogens as they are late 03's and cannot be baked...

anyone reading this, if you have a used '00-02 halogen or projector based headlight (damaged or in good condition) that you'd like to get rid of, please let me know!