Xoutpost.com

Xoutpost.com (https://xoutpost.com/forums.php)
-   X5 (E53) Forum (https://xoutpost.com/bmw-sav-forums/x5-e53-forum/)
-   -   service engine light problem (https://xoutpost.com/bmw-sav-forums/x5-e53-forum/36769-service-engine-light-problem.html)

poppy400_0 09-09-2007 09:56 AM

service engine light problem
 
im having a problem with my service engine light ,i hook up my obd 2 .to read the codes. it read sensor heater circuit malfunction (bank2 sensor2) question ! is this ths the thermostat ? or something else.i already replace the thermostat but it keeps reading what i mention up top, can anybody help me with this

utahx5 09-09-2007 12:23 PM

O2 sensor bank 1 sensor 2

ungcj 09-09-2007 05:24 PM

What is an obd2? Where did you get it? How much was it? Thanks

poppy400_0 09-09-2007 11:10 PM

OBD2
 
onboard diagnostic,actron cp9135 auto scanner with screen definition brought it on ebay $66.99.seller :maverickdirk(923) very good ,
to have

ungcj 09-10-2007 07:57 AM

Thanks...I will give it a try. Cheaper than a dealer visit. I bought the tech manuals and parts manual on e-bay for about $40 so together I hope to save money and get my old motorhead juices flowing again.

poppy400_0 09-10-2007 04:25 PM

:rofl: utahx5, thanks

ungcj 09-10-2007 05:20 PM

Quick question....can you reset the SES light and the Oil Service Light with the Actron cp9135?

butundo 09-10-2007 10:50 PM

Quote:

Originally Posted by ungcj
What is an obd2? Where did you get it? How much was it? Thanks

If you go to a local car parts store, most will hook up a obd2 for free. My local Autozone does it for free.

bmwe53fan 09-10-2007 11:55 PM

Quote:

Originally Posted by poppy400_0
im having a problem with my service engine light ,i hook up my obd 2 .to read the codes. it read sensor heater circuit malfunction (bank2 sensor2) question ! is this ths the thermostat ? or something else.i already replace the thermostat but it keeps reading what i mention up top, can anybody help me with this

Your O2 sensors have heaters in them and it looks like one of the heaters has failed -- I would check the connectors to your oxygen sensors and if they are ok then you probably need to change out your after cat O2 sensor.


All times are GMT -4. The time now is 12:37 PM.

vBulletin, Copyright 2026, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved.