19" style 132 5-spoke wheels (?)
 

Anybody have pics of these wheels on their X5?

I don't, but Rangerfan does. I like 'em, a lot. :thumbup:

You can see a couple of pics of mine here...
http://www.xoutpost.com/gallery/brows...?c=3&userid=28

Are those factory tints on Ranger's X? Somebody did a damn good job!...

Here's a pic of my X5 with the Style 132's:

http://img276.echo.cx/img276/9315/imgp15609zt.jpg

Thanks guys...
 

They look great! I like these wheels a lot too... especially considering that tires for this size are much cheaper than 20's (and there's more selection as well). The other advantage of the 19"ers is the fact that you're still riding on a considerable sidewall height to protect you from potholes, etc.
Is anyone running the 19x10 up front too, or just in the rear? (I was thinking of going 19x10 with 285/45's all around; this way I could do a 4-wheel rotation periodically)

Running 19x10 up front may (I don't know for sure :dunno: ) have interference problems with sharp turns, which is why they limit tire width up front.

Does anyone know if this statement is accurate? At some point, I am considering running 19x10's and 285/45's all-around.

Thanks.

I know there are guys in this forum that run 10"+ wheel widths up front, with 285's (and bigger) tires... so far, I haven't heard any first-hand issues.

Isn't Janix running 10.5" all-around as winter setup? I don't think it should be a problem.

285s - not sure that that'd work. But 19x10s with the right offset are fine with 275s. I got the suggestion from here: http://www.xoutpost.com/773453-post9.html If you put 275/45-19s all around, then it works (see attached picture) - no rubbing or other issues so far.

The factory 20s had 20x9.5 ET45 with 275/40-20 tires in front. Putting a 275/45-19 on a 19x10 ET45 wheel puts the centerline in the same position relative to the strut and fender, with the same width tire with just a slightly wider wheel being mounted to.