Xoutpost.com

Xoutpost.com (https://xoutpost.com/forums.php)
-   X5 (E53) Forum (https://xoutpost.com/bmw-sav-forums/x5-e53-forum/)
-   -   S54 e53 (https://xoutpost.com/bmw-sav-forums/x5-e53-forum/42021-s54-e53.html)

Islands52 01-21-2008 01:53 AM

But look at the RPM its delivered at...

Its' a fun motor, but its not particularly powerful down low, the S52 is nearly as torquey. Also the power is very delivered in a very linear way, so it does not seem extremely fast, so even in an MCoupe a popular modification is switching from a 3.15LSD to a 3.73LSD, just to get that torque. Keep in mind in a 3100lb. 2wd vehicle I am only getting 18mpg with the S54 as well...this motor is going to work HARD in an X.

Best of luck with your swap.

SANguru 01-21-2008 02:18 AM

Quote:

Originally Posted by stabmasterflex
Has anyone out there completed an s54 swap into a m54 3.0 x5? The only problem I forsee is the oil pan/lubricaiton sytem. Comments?

it will be slow as sh!t.....

mrkbbd 01-21-2008 02:24 AM

Quote:

Originally Posted by SANguru
it will be slow as sh!t.....

Couldn't be said any better :)

stabmasterflex 01-23-2008 01:17 AM

you honestly think this engine swap would create a slower than stock 3.0 x5? Are you still thinking its mated to an auto? "Slow as sh!t" give your heads a shake. I mean. obviously there is no v8 6spd x5's or we wouldn't be discussing this, or has this been done?

Wagner 01-23-2008 05:29 AM

Quote:

Originally Posted by stabmasterflex
you honestly think this engine swap would create a slower than stock 3.0 x5? Are you still thinking its mated to an auto? "Slow as sh!t" give your heads a shake. I mean. obviously there is no v8 6spd x5's or we wouldn't be discussing this, or has this been done?

That motor has no torque compared to a V8 in the X5 (or a supercharged X5) and the revs are WAY to high to generate power for a 5-6000lbs vehicle. The gearing would be nutty with the AWD setup. The general opinion is, why blow your money on this when a supercharger could be done for less and actually work.

stabmasterflex 01-24-2008 01:26 AM

The point of this post is: could you, NOT would you.

Wagner 01-24-2008 05:53 AM

then yes, you could with enough dollars and enough time.

mdpowered 04-23-2008 04:02 PM

ive actually done it you need to fabricate alot to do it, but its well worth it since its been done...

i will try to post some pics..

if you have any specific questions i sure i could help..

i know a guy that can make you a custom oil pan you definatelly need that for starters....

Nick P 12-19-2012 06:09 AM

Quote:

Originally Posted by mdpowered (Post 463019)
ive actually done it you need to fabricate alot to do it, but its well worth it since its been done...

i will try to post some pics..

if you have any specific questions i sure i could help..

i know a guy that can make you a custom oil pan you definatelly need that for starters....

Please, post more pictures, it's very interesting!


All times are GMT -4. The time now is 01:20 AM.

vBulletin, Copyright 2026, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved.