Xoutpost.com

Xoutpost.com (https://xoutpost.com/forums.php)
-   X5 (E53) Forum (https://xoutpost.com/bmw-sav-forums/x5-e53-forum/)
-   -   2004 Headlamb Bulb Replacement DIY (https://xoutpost.com/bmw-sav-forums/x5-e53-forum/42361-2004-headlamb-bulb-replacement-diy.html)

Overboost 03-12-2018 07:35 PM

Quote:

Originally Posted by Overboost (Post 1130521)
I noticed this morning (still dark)when I left the house the drivers side xenon flickered a few times so I may be headed for a failure. I have a spare D2S bulb so I might try that first. The right side failed about a year ago so after 13 years, I guess it's time... :(

Just an update, swapped out the bulb and still having a flickering issue. It leaves the ballast or igniter as my problem so more troubleshooting to come.

*EDIT* Picked up a used ballast on fleaBay for $44 and should be here by the weekend. Pulling the front bumper... Again... http://s1.e46fanatics.com/forum/imag...palmsmiley.gif

Crowz 03-13-2018 01:24 AM

Ouch. Wife's e53 messed up on me one night when I made a cig run. The light flickered and didn't come on. Figured it was the ballast but it never messed up again after that so I guess I got lucky.

Spent my birthday today testing the steering angle sensor on the e53 again. Weird how it works a few times then quits. I guess the brushes are shot in it.

Overboost 03-17-2018 11:54 AM

Quote:

Originally Posted by Crowz (Post 1130639)
Ouch. Wife's e53 messed up on me one night when I made a cig run. The light flickered and didn't come on. Figured it was the ballast but it never messed up again after that so I guess I got lucky.

Spent my birthday today testing the steering angle sensor on the e53 again. Weird how it works a few times then quits. I guess the brushes are shot in it.

Swapped out the ballast this morning and seems to have fixed it, no flickering. I didn't need to completely pull the front bumper, only slide it forward about 3 inches to maneuver the headlight out. I still had to pull all the fasteners to the point of completely removing it but it was a lot easier not having to pull any of the wiring or washer hoses. I have this front bumper removal down to 10 minutes now... :nanana:

Crowz 03-17-2018 02:05 PM

Hope my steering able sensor job next week goes as smoothly.


All times are GMT -4. The time now is 06:05 PM.

vBulletin, Copyright 2026, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved.