(HELP!!) AC not working properly after FSU replacemnet
 

After reading a few posts, I just replaced the FSU because my blower fans were staying on after turning the car off and draining my battery and my climate fans were blowing extremely low.

Now after replacing the FSU, my AC is only coming out of the window side driver vent(and it's not very cold). Semi warm air is coming out of the other 3 vents. Now, I had AC before i replaced the FSU coming out of all 4 vents, but extremely low force out of the vents.

does anyone have any suggestions or can direct me to another thread/post for this problem?

I really love this site because all the pics and DIY's have saved me $thousdands in repair bills by doing it myself.

Again, any help would be appreciated.

Thanks,

Jeff

on a 5er it was due to corroded wires to the FSR or loose connectors .. maybe thats whats causing this behavior ... sorry culdnt be of much help!

Wow! Deja vu!
 

I just had a similar problem with my car! The A/C was only blowing cold air out the drivers side vent, the other 3 vents were blowing warm air. Then the fan stopped working completely. I've check the fuses, but they were fine. I'll be interested to hear what we find out. I feel for you!

- Rod

Just replaced my FSU, I now have a blower again! I never experienced intermittant fan speed problems, it just went out all at once! Haven't had a chance to see if it also fixed my lack of cold air in some of the vents problem.....

Using the "search" function above i found this http://www.xoutpost.com/x5-e53-forum/...owing+warm+air

By the way, I had the same problem starting yesterdat at a 43°C day... I would take my X to my "Compadre's" crafty shop tomorrow... I'll keep you posted