![]() |
Do you have a DIY for the Kutsinta !!!! Great job homey this DIY will help me when its time to change the water pump and thermostat.... :thumbup:
|
Good job Bimmer360.
Now, can i have some kutsinta? :bustingup |
hahaha, yeah....i'd kill for it.
Quote:
|
The kutsinta will motivate you! :rofl:
Quote:
|
:rofl:
Quote:
|
You lost me between Step 3 and Step 4. In Step 4 it appears that the radiator has been removed. This would make it very easy to take the picture in the DIY. I got to that point and put it all back together (I had to take my daughter to work). Now my "Check Coolant Level" light is on.
Also ran the OBD II scanner and "No Codes". I'm at a loss. I topped off the radiator fluid I drained out in the first step. I am running cool so the thermostat is 'open'. '02 X5, 3.0, 115,000 miles. |
No need to remove the radiator, I was able to bypass that step. I do not recommend doing that Coz not much room. That's your call.
Quote:
|
Quote:
|
No need to use that scanner since no failure in the system but just need to top off. If you didn't fill it all the way, you just need to add more. Let me know if this solves the issue.
|
Quote:
|
| All times are GMT -4. The time now is 07:56 AM. |
vBulletin, Copyright 2026, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved.