|
MID Removal unsuccessful
2002 X5 3.0 W/ Business CD player
Ok ladies and gentlemen any help would be appreciated. Having MID Pixel problem. Removed volume knob found torx location turned about 75 degrees felt MID move a little, tried to rotate out no luck. Now when I look into torx location I no longer see torx head just a elbow shaped piece of metal with a round hole. Any suggestions would be great. Thank you in advance for any help. |
all you have to do is turn that torx or elbow shape to your left and about 1/4 of the turn =25 degrees not 75 degrees.
|
:iagree: YES
I did not use a torx but a hex key. My torx screwdriver bit was too short. Hex key worked just fine. |
Quote:
Possibly why it did not come out, if you can feel it turn a quarter of a turn and lock, the latch is released then you can pull it out while holding the torx in the locked position.... Hopefully this helps |
you need a 'T15' Torx driver
|
1/4 turn = 90 degrees, not 25 degrees. Turn the screw appox. 1/4 turn counterclockwise. Pry the midi out with a credit card. Slide the credit card into the crevice on the left side of the MIDI and it will come right out.
|
| All times are GMT -4. The time now is 04:12 AM. |
vBulletin, Copyright 2026, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved.