PDC error
 

Hi !

It was along time ago i where here ;)

I got a problem my PDC is not working , when i put the gear in Reverse the PDC lamp flash on i get a PIIIIIIP the same if i put the gear in Drive ...

The PDC don´t tell me if I´m near somthing
What could the wrong be?
(I even washed the car but no help)

Regards

Listen, you need to start up the engine and turn on the PDC button inside the saloon, and then go near each sensor and put your finger delicatly near the sensor, you should get a little sting on you finger, you will feel it stlitly, little waves on your finger, and WHENEVER YOU DONT FEEL THE STING ON YOUR FINGER, THATS THE SENSOR THATS MESSING UP THE REST OF THE SYSTEM AND CAUSING OTHERS NOT TO WORK.
Go near each sensor and try it.
Usually there are tiny thin wires inside the sensors, 2 of them and some of them either get disconnected or even ripped, and it's an easy fix, you need to either reconnect the wire, or fix the ripped once.
I have the same thing on my further left front sensor, in my case its the sensor itself and i have ordered a newone for 150$
I hope it helps

Thanks for the Help!! I will test this now.... ;) / 150dollars? DAMN thats not cheap for a little plastic thing

then why not unplug the thing and live with out it.:D

Tell me how it goes, well if you look at it that way, yeah it's a lot for a single sensor, or plastic, but it does a lot for me, saved my ass many times:thumbup:

I would but then the car would have 50 crash marks ( the girlfriend drive the x too)

Jigaro: I did what you said but NOT a little STING at all ..?

It's kind of hard to tell how the sting feels.
I had the same problem.
i sayd whenever it does not sting thats the sensor that does not work, in other words good sensors should sting or you will feel something on your finger.
Dealer explained and di it for me when my sensor went

Okej ! I did understand but there is no sting at all... maybe it´s too cold ? ( about -10C° )

hahahaah don't touch the pdc with your finger then, you might freeze on the car, jesus -10

hehe well yesterday night was very cold (-20°c) , and today the
window washer engine was just going on would´t stop until i unplugged the wire ... the doors did not open bla.bla.bla.bla :(