Xoutpost.com

Xoutpost.com (https://xoutpost.com/forums.php)
-   X5 (E53) Forum (https://xoutpost.com/bmw-sav-forums/x5-e53-forum/)
-   -   X5 asking for CODE on navigation. Won't Start (https://xoutpost.com/bmw-sav-forums/x5-e53-forum/61915-x5-asking-code-navigation-wont-start.html)

rastaFarai 05-16-2009 08:49 PM

X5 asking for CODE on navigation. Won't Start
 
So first off, thank goodness I have my wife's car around now.

So today after cleaning up in the house i decided to go outside in the "is it about to rain?" weather and do some MODS.

When I get the car up and running I'll start a new thread lol..

So I was putting my SMG paddle shift M wheel on the car and I decided to disconnect the battery this time since the last time i didnt and i ended up riding around with the airbag light. So tried to 'do it right' this time.

Basically after reconnecting the battery and trying to start the car up - the alarm went off and the Nav screen had the code screen.

When i did the nav retrofit i remember messing around with the code, and i remember what i set it to. Entered it in, not working.

So any suggestions? I see the screen says:

Emerg. Deact.
Wait: 9:59 min

I've had key in position 2 and waited the 10 min (set a timer on my storm). Tried starting the car - alarm.

HELP!!!

http://farm4.static.flickr.com/3628/...e12055d5c5.jpg

UCrewX5 05-16-2009 08:52 PM

Did you try code 0000 ?

rastaFarai 05-16-2009 08:54 PM

Quote:

Originally Posted by UCrewX5 (Post 620969)
Did you try code 0000 ?

LOL. See the screen? Yup - definitely tried 0000.

rastaFarai 05-16-2009 09:13 PM

OK - I called BMW Assist and they connected me to a service manager even though my warranty is out and i dont have bmw assist. They do offer to help for $119 plus $20 towing fee if i need it. They did transfer me for free to a service manager though.

So the SM told me to put the key in position 2 and wait about an hr. My car is sitting in the driveway with the key in it. Hopefully no one takes it. :(

cjawahir 05-16-2009 10:27 PM

disconnect the battery for 5 min ,

turn the ignition to position 1 and leave for 10 min, then start .

cj

rastaFarai 05-16-2009 10:31 PM

OK will try that tomorrow. too cold right now. Thanks.

trinidad huh? i know its not cold down there.. must be nice.

cjawahir 05-16-2009 10:38 PM

yes its Trinidad and Tobago nice ,

I hope you did not input the code more that 3 times , but i think this should work .

cj

rastaFarai 05-16-2009 10:40 PM

umm where were you 3 hrs ago? Yes i did. What now? Do I have to find a way to bring it to dealer?

cjawahir 05-16-2009 10:46 PM

I think it should still work , the reason it did't work is, you had the switch in position 2.

good luck

cj

rastaFarai 05-16-2009 10:48 PM

OK thanks. I specifically asked the BMW SM that when i called. Position 1 or 2.

I'd go try it again but i don't want to keep the neighbors annoyed with my alarm.

nsxttt 05-16-2009 11:16 PM

Quote:

Originally Posted by rastaFarai (Post 620976)
OK - I called BMW Assist and they connected me to a service manager even though my warranty is out and i dont have bmw assist. They do offer to help for $119 plus $20 towing fee if i need it. They did transfer me for free to a service manager though.

So the SM told me to put the key in position 2 and wait about an hr. My car is sitting in the driveway with the key in it. Hopefully no one takes it. :(


Don't think that will be a problem... Sorry, couldn't resist. :D

Let us know if it works out for you.

rastaFarai 05-17-2009 11:56 AM

Well sitting in car waiting. Should I try and crank or should code screen go away?

rastaFarai 05-17-2009 06:49 PM

So no luck. Maybe tried too many times with the code. I've left it for an hr, i've left it for 10 min. haven't tried the code since unlplugging the battery.

Suggestions? Is my next step to dealer? Is the car in full antitheft mode and shut down?

cjawahir 05-17-2009 07:22 PM

I am not seeing any instruction if you past 3 chances , you may have to visit the dealer .

if you disconnect the nav computer , i wonder if it will start ?

cj

rastaFarai 05-17-2009 07:27 PM

hmmm Nav omputer? I just installed the TV module too - so i might still have video. Think the nav computer would have anything to do with it? I read (other bmw forums) that the code is coming from the computer, thats why car wont start. So not necessarily coming from radio.

I'll give it a try. Battery is dead now i think, monitor wasn't coming on earlier. I really don't want to have to tow this thing. Will the dealer send a rep with the computer? LOL

cjawahir 05-17-2009 07:52 PM

hi , you input the code in the on board computer , that is also the radio tv screen etc .

I am thinking if you disconnect this computer , it cant send any signal to the ews and ecu , and your key is a good working key , it should start .

cj

NyMench 05-18-2009 02:54 PM

Old BMW hidden secutiry system.....love to use is!

When all else fails......

If you are in lock out and dont recall the code......

To Reset:
must leave car on key position 1 for 60 minutes
then turn off
try to restart.

Some cars require key position 2 for 60 minutes.

Good luck,

rastaFarai 05-18-2009 03:07 PM

tried this. Will try again tonight before i tow it to dealer on wed or thurs.

Battery died the last time i tried in position 1. lol. will put my trickle charge battery on it.

rastaFarai 05-18-2009 07:36 PM

Ok - key in position 1. My battery is dying though. So i'll have to get a new battery when i go to dealer. I don't want to trust the battery.

Weasel 05-18-2009 08:30 PM

I'd disconnect the battery for about an hour, and have it charging while dissconnected. Once all internal capacitors are fully discharged it may forget the code memory... If when you hook it all back up it still asks for the code, just let the 15 minute timer on the screen time out and it may start then... hopefully :D

So who accidently hit the code button on the nav screen?

rastaFarai 05-18-2009 08:48 PM

ok - trying that now. LOL. I'm sure it's in full anti theft mode or something. All this leave for 60 min in key position 1/2 killed the batt..:D


no one accidentally hit the code button, I hit it on purpose lol. Next time RTFM. Live and learn i guess.

rastaFarai 05-25-2009 10:14 PM

apparently it was my cluster that needed to be reset. Hooked it up to the computer at my indie and reset computer. Seems like my sunroof is acting weird now - won't open, will open upwards (the vent position) but won't open back. The cover will go back, but will only go back 4 inches at a time. no more 1 touch etc.

GX5NY 05-25-2009 11:06 PM

default code is 0123

man I wish I would have read this earlier....

glad you got ur 4.8is restarted.... where in LI are you?

Weasel 05-25-2009 11:58 PM

Quote:

Originally Posted by rastaFarai (Post 624257)
apparently it was my cluster that needed to be reset. Hooked it up to the computer at my indie and reset computer. Seems like my sunroof is acting weird now - won't open, will open upwards (the vent position) but won't open back. The cover will go back, but will only go back 4 inches at a time. no more 1 touch etc.

Good to see you're up and running again, and the sunroof just needs to be reinitialized. Just hold the button up in the same matter as on the regular sunroofs, pressed in to the vent position and hold untill your finger wants to fall off. The sunroof will sit there for about a minute then go through the whole open/close routine including sunshade. Once it has fully stopped moving it should be as good as new.

cjawahir 05-27-2009 10:52 AM

Quote:

Originally Posted by rastaFarai (Post 624257)
apparently it was my cluster that needed to be reset. Hooked it up to the computer at my indie and reset computer. Seems like my sunroof is acting weird now - won't open, will open upwards (the vent position) but won't open back. The cover will go back, but will only go back 4 inches at a time. no more 1 touch etc.

so did you clear fault code in cluster , and do you rember the fault code ?

cj

SAKRAM 09-17-2011 05:09 AM

same situation with my x5 .please explain how u solved this problem.
how u reset the code.

Ansamoiz 03-25-2012 08:38 AM

How did you fix the problem. I have the same issue.

rastaFarai 03-25-2012 10:44 AM

I brought it to my indie. He reset it

SAKRAM 03-25-2012 11:06 AM

Quote:

Originally Posted by Ansamoiz (Post 871708)
How did you fix the problem. I have the same issue.

brought it to local mechanic he connects his laptop and run diagnostic test 4 bmw e53.it tooks only five min to reset.

Ansamoiz 03-25-2012 05:41 PM

The issue has been resolved. I left the key in ignition at position 1 for 60 minutes. Then removed the key, re-inserted it and started the car. It's all good now.


All times are GMT -4. The time now is 07:09 AM.

vBulletin, Copyright 2026, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved.