![]() |
Intermittent wiper settings explaination please
Ok, it's raining and we all know it. My question is about the rain sensing intermittent settings. We all know the one swipe, slow and fast settings, but the roller adjustment setting for intermittent wiping confuses me. Each setting doesn't seem to make any difference in the interval of the wipe. :dunno: Can anyone explain this to me please?
|
What does your manual say? I believe the subject
is covered on page 71 of the 2005 manual. The rain sensor automatically controls the wiper operation as a function of the rain intensity. It is positioned on the windshield, directly in front of the inte- rior rearview mirror. To activate the rain sensor: Move the lever to position 1 as of igni- tion key position 1. The wipers travel once across the windshield, regardless of the weather conditions. You can leave the lever permanently in position 1. It is then only necessary to activate the rain sensor as of ignition key position 1. To do this, turn serrated dial 7 briefly |
It states the roller controls the speed of the wiper. I've tried the settings and it doesn't seem to affect the speed. And thanks for the sarcastic remark. German manuals are notorious for lame explanations. I'm just trying to get clarification.
|
I was playing with my wipers last week as well! That selector didn't do a darn thing????? I was a little confused as well. I just ignored it. Now I'm curious again
|
i dun think he was being sarcastic but i could be wrong, but the speed is kinda un noticeable. i have selected 7 and 1 and if you pay close attention there is a slight difference but not that much.
|
Quote:
|
Nothing sarcastic about checking the manual.
It's the first line of reference. I still use it first then I search the site for additional info. In this case my manual was in the car so I just searched for the information right here on the site. It explains the operation of the controls and what to expect. Quote:
|
Quote:
|
When you roll upwards, the wipers are more sensitive. When you roll downwards, they are less sensitive. It doesn't make too much of a difference, but it's there. I personally keep it rolled all the way upwards. Hope that helps!
|
Sorry of you took offense but I
understood what you we're asking that's exactly why I quoted the manual and the page number. It explains all the controls and say's that the serrated dial adjust the sensitivity of the rain sensor when the lever is in position 1. The only way you will notice any difference is if it is raining, and how hard it is raining. There are a number of positions that can be used with the serrated dial and one must try each position with the serrated dial while it's raining to notice the difference. The sensitivity and the interval of the wipe is determined by how much rain is seen by the sensor. It isn't something you or I can determine or measure. The rain sensor does it electronically. |
All times are GMT -4. The time now is 11:58 AM. |
vBulletin, Copyright 2025, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved.