anyone got pics of dinan camber plates?
 

looking for pictures.. thanks

nevermind.. i got the info that i needed...

I imagine it won't be long till you've got that X on the track!

JV

LOL... ummm... i got a mission to accomplish and i need data.. only one way i know how to get that data...

more clues to what the secret mission is on its way over the next few days/weeks...

I am looking forward to that! You're good about sharing, I'm not worried. :D

JV

Are you thinking about putting E46 plates?
Someone told me the weight of the E53 would overwhelm the E46 plates.

Dinan makes camber plated for us.

Yeah, but they aren't enough.
2 degrees?

But they are relatively cheap at 249$ :)

my stock front is at -2 degrees per side. stock rear is at -4 degrees per side...

i doubt the strut hats are the same and fit would be an issue. stock hats don't offer enough camber unless i swap hats side to side or rotate the bearings in them like what Dr G did in the e46m3. i could be wrong since the oem camber tool is the same on them tho...

also, the weight would not overwhelm the plates. the plates pass the weight onto the springs and the shocks under them... you would see strut failure before the plates would crack...