A/C clutch gap spec
 

Help!!! :confused: I need to know the gap specs for the A/C clutch to pulley? and the shims part no. inside the clutch. Does anyone know how tight the screw must be in able for clutch to engage properly? Thanks in advance.

It is 2003 x5 3.0 - calsonic compressor.

I got few washers from the auto parts store, the bolt is 6mm so you need to make sure it fits the bolt. The new washer was a bit larger, so I use a dremmel with grinding stone and remove some... to make it fit inside the clutch channel. Finally, one new washer +2 original and the gap is 3 sheets of paper wide...that's it. The AC finally works, the clutch engaged and air is cold again!!! Thanks you all!:thumbup::nanana::rofl: