E53 NEED HELP W/NON DSP SUB AMP WIRE COLORS
 

I have read on this site, 2 different ways to connect my right sub woofer. I have an E53 non dsp / non nav. The standard amp by Alpine. I want to connect to new sub amp for a right subwoofer.
Is it the black/blue+ and the brn/orng- that i connect to my sub or is it the thicker solid blue#25 and brown #24 that i connect to. Also I am using the Level Input connection to the sub amp. If that matters. Any one have the answer? Thanks Deanvh

Thanks for the speedy reply. Isn't the yellow w/black (+) , Brown w/ornge(-) for the LEFT side? (from the drivers point of view). And, if I am connecting directly to the high level speaker inputs on the sub amp? I'm NOT using a Line Output Converter. Any help would be appreciated. Thanks.

Yes, my mistake. Yellow/Black is for the left side. In the case of adding a subwoofer though, it doesn't really matter since you're just tapping into those wires for a signal.

Your amp's level input connection does a similar job as a line output converter would. Its taking high level input and converting it into a signal in which the amp can use. So either way you choose, you'll use those wires to tap into.

Thanks for the tips Charlie!

NP, good luck with the install.

Hey Charlie , One more question, Will my "balance" and "fader" controls have any effect on by subwoofer? (right side only) THANKS!

Yes, it will.