![]() |
4.8 Front Air Suspension
Looks like I have a small leak in on my front left air suspension - settles about an inch overnight. Is this a DIY job ? I searched for instructions, but no DIY came up. I can purchase the replacement from Arnott or others. Are all 4.8 bags the same ? Do I need to do both sides ? Will I have any sensor issues with non OE parts ?
Thanks |
" Bump "
|
All 4.8 is bags are the same. But, the front and the rear are different. Use the search function, I think there is a brief diy somewhere. Make sure its the bag and not the sensor
|
Hi i had same problem pass side was leaking i bought Arnott Strut work like charm i replaced mine at home very easy and you need power tools to change or pay $200 to local shop. good luck
|
I just got a Arnott strut put on today. Took a local shop less than two hours. So far so good!
|
you must do a ride height calibration via GT1.....
|
Did the arnott air struts seem like good quality? My front drivers side is starting to leak a little bit. After I drive the X a block it is back up to normal ride height. Is an alignment required as well as the ride height calibration?
|
Quote:
I didnt realize a 4.4i had front air? or do you have a 4.8is? |
Quote:
|
I replaced the front right about 6months ago and its working beautifully. I just ordered another (front left) and will put it on next week. No problems thus far!
|
| All times are GMT -4. The time now is 10:13 AM. |
vBulletin, Copyright 2026, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved.