Xoutpost.com

Xoutpost.com (https://xoutpost.com/forums.php)
-   X5 (E53) Forum (https://xoutpost.com/bmw-sav-forums/x5-e53-forum/)
-   -   Fix or replace (https://xoutpost.com/bmw-sav-forums/x5-e53-forum/72485-fix-replace.html)

ekimv65 04-25-2010 11:54 AM

Fix or replace
 
1 Attachment(s)
Should I replace the wheel or is there any type of repair kits available that look right?

diyanich 04-25-2010 11:58 AM

get some leatherette over that ugly plastic...cheap and easy

jst2878 04-25-2010 12:28 PM

take it off and sand and paint. youll save around 300.00 doing that way. let your diy gene do the working

killcrap 04-25-2010 01:16 PM

Quote:

Originally Posted by jst2878 (Post 735725)
take it off and sand and paint. youll save around 300.00 doing that way. let your diy gene do the working

that part is about $85, dunno where your getting your parts.

ekimv65 04-25-2010 01:38 PM

Where would you get one?
 
Is there a good online store?

Naz24 04-25-2010 02:51 PM

yeah u can just buy that plastic piece, its no big deal

ekimv65 04-25-2010 03:21 PM

Any one no
 
the part number or what it is called?

jst2878 04-25-2010 03:44 PM

Quote:

Originally Posted by killcrap (Post 735737)
that part is about $85, dunno where your getting your parts.

he said "should I replace the wheel?" that is why I answered that way. plus, 20 dollars is better than 85. 65 in yo pocket "student", because u just learned something today. I did too

toshiba 04-25-2010 03:51 PM

1 Attachment(s)
DIY.

Bunyan 04-25-2010 05:42 PM

Is there a "how-to" on removing the plastic part?

Naz24 04-25-2010 05:54 PM

although this is the old sport steering wheel, i would guess it is the same process:

http://www.xoutpost.com/articles/x5/...heel-trim.html

X5 Meister 05-04-2010 02:31 PM

Part # 2: Cover

RealOEM.com BMW E53 X5 4.8is Sport st.whl.airbag-smart /Multifunction

Quote:

Originally Posted by ekimv65 (Post 735757)
the part number or what it is called?


ekimv65 05-05-2010 09:27 AM

THX X, I ordered the CF tape and am going to see how that looks. I will say one thing, I ordered from ECS, did the upgraded shipping, then they didn't ship for 3 days post order. Anyone else have such great service from ECS, sheesh!

Ill snap some shot post install.

THX All!

ekimv65 05-08-2010 11:08 AM

?????????????
 
1 Attachment(s)
problem, the photos in the DIY do not appear to be the same. Do I just pull a little harder? Any help would be appreciated.

killcrap 05-08-2010 11:16 AM

Quote:

Originally Posted by jst2878 (Post 735760)
he said "should I replace the wheel?" that is why I answered that way. plus, 20 dollars is better than 85. 65 in yo pocket "student", because u just learned something today. I did too

$300 for the wheel? you must be insane, the steering wheel is $5-700.

X5 Meister 05-08-2010 11:47 AM

That's a pretty big range there. It also includes $300. ???

Quote:

Originally Posted by killcrap (Post 739601)
$300 for the wheel? you must be insane, the steering wheel is $5-700.


killcrap 05-08-2010 12:03 PM

your smart enough to figure it out.

ekimv65 05-08-2010 12:07 PM

Who are you replying to?

x555a 05-10-2010 02:33 PM

Quote:

Originally Posted by ekimv65 (Post 739598)
problem, the photos in the DIY do not appear to be the same. Do I just pull a little harder? Any help would be appreciated.

There are 5 size 10 torx screws holding the cover in place two either side at the top and one below.Have a look behind the wheel and you will see the holes.Unscrew from the back of the wheel turning it to gain better access.
I think it's possible to take off the wheel trim without removing the airbag from what i have heard.
I did this job way back and resprayed the trim to match my interior and it looks as good as the day i did it.;)

ekimv65 05-10-2010 10:34 PM

Fixed! Thanks all for the help! Some photos attached
 
6 Attachment(s)
The last tip from X555 was the 1 that put me over the edge, as did, Xmeisters link. Thanks again ALL! :thumbup: ;):cool:

X5 Meister 05-10-2010 11:16 PM

Nice:thumbup:

Naz24 05-10-2010 11:18 PM

carbon fiber, sweet

x555a 05-11-2010 02:15 AM

Glad to be of help mate :) and that carbon fibre looks great:thumbup:


All times are GMT -4. The time now is 09:27 PM.

vBulletin, Copyright 2026, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved.