water condensation in my headlight
 

i washed the car and noticed that there is a water condensation in the left headlight and that the angel eyes do not turn on
is it caused by the water condensation and the angel eyes would turn on when the condensation goes ?:dunno:

OEM or Aftermarket?

Check all the caps and make sure they are on tight.

If you opened them for the angel eye installation its probably your seal.

it s a new headlight
i noticed that when i tap on the external cover of the headlight the angel eyes turn on for a second
im waiting until tomorow to see if the angel eyes failure is caused by the condensation

I doubt its the condensation causing the AE problem. I'd double check the harness connection to the HL and also the connection to the AE inside the HL.

For the condensation, eh wouldn't worry too much. You can check the different caps for proper fit - side light, AE, and main.

There are I think two holes with breathers on the back of the HL assembly. Moisture can obviously go through there. You can check and make sure the breathers didn't fall out or just block the holes completely.

Good Luck! :thumbup: